
4
This equipment is designed and sold for commercial use only by personnel trained and
experienced in its operation and is not sold for consumer use in and around the home nor for
use directly by the general public in food service locations. For equipment to be used by the
general public, please contact the factory
.
Before using your new equipment, read and understand all the instructions associated with the
unit prior to putting it into operation. Make sure all people associated with its use understand
the units operation & safety before they use the unit.
INSTALLATION
The warmers are equipped for the voltage indicated on the nameplate mounted on the front panel.
They will operate on alternating current (AC) only.
DO NOT CONNECT TO DIRECT CURRENT (DC).
The installation of the tortilla warmer should conform to the:
NATIONAL ELECTRIC CODE AND ALL LOCAL ELECTRIC CODES AND
ORDINANCES AND THE LOCAL ELECTRIC COMPANY RULES AND
REGULATIONS
DO NOT INSTALL WARMER IN OR NEAR ANY COMBUSTIBLE LOCATION.
For your protection we recommend that a qualified electrician install this warmer and should
be familiar with electrical installations and all electric codes. Proper connections and power
supply are essential for efficient performance. The external wiring should be in conduit or an
approved type of flexible cable suitable for operation at the temperature indicated on the wiring
diagram, and of a proper size to carry the load. The supply circuit should be properly fused
and equipped with a means of disconnecting, as required by local electrical code.
Minimum clearances to stainless steel counter. (FGILTBA & FGDLTBA)
Sides:
/4”
Bottom:
8”
CONNECTING POWER SUPPLY
(FGILTBA & FGDLTBA)
There are pigtail leads for the supply connection located at the rear or side of the unit. All
connections must be made by a qualified electrician and should be familiar with electrical
installations and all electric codes.
This unit must be installed in conjunction with a double pole switch that disconnects both lines
to the warmer.
LOCATING AND LEVELING THE UNIT
Be certain when using the wall mounts they are properly installed.
CAUTION
WARNING
WARNING
CAUTION