background image

13 

 

Maintain the ventilation of working sites. 

Check and maintain under safe working conditions. Check and maintain the braking, steering, speed 
direction control system, emergency facilities, head/rear lights, controller, and safety equipment. 

Check the battery cover as per the right methods. 

 

Battery Maintenance

 

The batteries for this vehicle have  high current, high capacity,  and  a long lifetime. To keep the 
vehicle in good performance, it is very important to maintain it in the correct procedure. 

The connectors on the batteries are the output connectors. Keep the area clean and dry, with no 
foreign matter or dust  on it, or the leakage or short-circuit. This will  shorten the battery life or 
possibly burn it out. 

WARNING:

 

Don’t let tap water enter the battery. 

Check the height of the electrolyte periodically. Check it once per week in summer and once every 
two weeks the rest of the year.  Standard height level is  10-15mm  (½“)  higher than the battery 
plate. If is too low, please add the recommended distilled water or liquid. 

Keep the wiring  well-connected. After using the vehicle initially for 2-3 days, the completed 
inspection for all connectors should be carried out. Inspect the vehicle once a week following. Any 
loose or rusty connectors should be fixed. Loose or rusty connectors can cause high temperature, 
damage, or possible sparking. 

NOTE:

 Don’t over-tighten terminals. 

Charge the battery immediately after discharge, or it will affect the battery life. 

Keep the filling-water container clean, so no impurities will be put into the battery.  

When the environment temperature is under -40° F, the density of the electrolyte after charging is 
1.28  -  1.29  g/cm

3

.  If it is more than 1.30  g/cm

3

, the battery  can  be damaged  badly. Add  water 

immediately to keep the electrolyte value to normal. If the battery discharges by 80% (the 
electrolyte is between the range 1.13 - 1.15 g/cm

3

), charge it immediately.  At this range the vehicle 

can only last 2 - 3 mi. Don’t discharge any longer, or it will damage the battery. 

Charge the battery fully before storage. Charge it at least once a month for 24 hours. 

Содержание ACcel-2-AC


























Отзывы: