Button Interface:
ON:
Press and hold the button for 3 seconds or until you hear the "Chirp" sound effect.
BLUETOOTH CONNECT:
PLAY / PAUSE:
When connected you can PLAY / PAUSE music by pressing the button once
ANSWER / HANG-UP & REJECT CALLS:
Press the button 1 time to answer or hang up (will chirp)
Press and hold 2-3 seconds to reject call (will beep)
SIRI / GOOGLE NOW:
Press button twice (quickly) to activate voice recognition on phone or tablet
COS
-
PLAY MODE / UN PAIR:
OFF:
Press and hold the button for around 5 seconds or until you hear the “chirp” noise and all
LEDS are off
*
Hold the gold oval when removing the back magnet plate. Do not pull on the
metal Delta when removing the magnet plate
*
Use 5V / 1A USB charge block or computer’s USB port
SPEAKERS
LED INDICATOR
MICRO USB CHARGE INPUT
MAGNET PLATE BACK
MICROPHONE
FUNCTION BUTTON
(will chirp before activates)
If unit is sleeping you must press once to wake unit then double tap
After the unit is ON it will automatically enter COSPLAY mode as long as you are not
auto-connected to Bluetooth. (COSPLAY mode is the same as PAIR MODE) If you are
already connected to Bluetooth press and hold the button for 2 seconds or until you
hear the "chirp" and the blue and red LED flash at 2 second intervals. While in this
mode press the button once for the "chirp" effect anytime on-demand. This unit will
enter "sleep mode" after 5 minutes of non-use. To wake press button once and then
resume "chirps".
®
®
*
Due to constant improvements specifications are subject to change without notice
If this is the first time connecting, wait until the blue and red LED flashes. Look for
FT-PIN on phone and press PAIR. If you have previously paired the badge it will
auto-pair. You will hear a "beep" when connected and the blue LED will flash every
5 seconds. If no usage after
the badge will enter "Sleep Mode". Any action
1 minute
like play/pause, incoming call,
and the badge will wake
or text