7
2.2 Rear Panel
1. LNB IN:
IF input from LNB to digital tuner.
2. LOOP OUT:
IF output from LNB to other digital tuner.
3. ANTENNA:
Connect the antenna of TV to Aerial IN.
4. TV/VCR:
Output to TV/VCR.
5. VCR SCART:
Scart output to TV input or VCR input/output.
6. TV SCART:
Scart output to TV input or VCR input.
7. 0/12V:
0/12V DC output.
8. VIDEO:
Video output.
9. AUDIO:
Audio output.
10. RS-232:
Serial port to upgrade software and additional Information
Service.
11. AC IN:
AC power input.
12. POWER ON/OFF (I-ON; O-OFF).
On the rear panel of the Receiver, the IF signal from the LNB is looped
through so that a second Receiver can be connected. There is also one
SCART connector provided as well as three RCA jacks that deliver video
and audio outputs. A forth RCA jack provides an output for the
programmable 0/12V volt control signal. At the moment, the serial interface
can be used to upload new software via a PC or to transfer satellite and
transponder data from one receiver to another. A built-in modulator is also
included. It operates across the entire UHF range and would be perfect to
use on older TV sets that don’t have Scart or RCA video/audio inputs.
Содержание SR-X1200D
Страница 6: ...6...
Страница 32: ...32 Specification...
