star sat SR-X1200D, Руководство пользователя

Страница: 31 / 35

31
Problem Possible causes What to do
LED on the front panel Mains supply cable is Check if the mains supply cable
Fail to light up/is not lit not connected is plugged into the power socket
No Picture or sound Satellite dish is not aiming Adjust the dish. Check the signal
to satellite accurately strength indicator in one of the
channel search submenus
No signal or weak signal Check the cable connections, LNB
And other equipment connected to
LNB & receiver, or adjust dish.
The LNB is faulty. Replace the LNB
The cable is faulty. Replace the cable.
Bad picture/blocking Satellite dish is not aiming Adjust the dish.
Error to the satellite accurately
Signal too strong. Connect a attenuator to LNB input
Satellite dish is too small Change to a larger dish
LNB noise factor too high Change LNB with lower noise factor
The LNB is faulty Replace the LNB
NO Startup menu on The system is connector Switch the TV to the appropriate
Screen after turning on by Scart cables and the AV input
STB for the first time.
TV is not in AV/EXT mode.
The remote control is Battery exhausted. Change the batteries(both)
not working Remote control is not Aim the remote control at the STB
aimed correctly Check that nothing blocks the front
panel
STB is in standby mode Check if LED indicator on the front
Panel is showing the time, press the
Power button to switch off standby
Mode.
You have forgotten Contact dealer or service provider
Your password they will help you set it up again.
Poor picture quality Low LNB power or
Change the LNB power to 14V/19V
Or less channels in signal loss in cable in Antenna setup menu
scanning
7.2 Menu Screen Structure
Menu Navigator