Menu Operations
34
3.7.2 Ethernet Setting
In
“
Ethernet Setting
”
menu;
The STB must be switched off. Please connect your STB with the Internet-Router via the Ethernet
Cable (RJ45) (not part of the delivery).
Press [Vol
◄
/
►
] to switch between Off or On.
Press [OK] to confirm it. Press [Cancel] and [Exit] button to leave the
“
Network Setting
”
menu.
In case you want to setup your Network manually, please disable Auto IP [disabled] and set the
required parameter by using the number buttons on your remote control, move to [MENU] to
confirm with [OK].
3.7.3 WiFi Setting
In
“
WiFi Setting
”
menu;
“
Red
”
button means flash the WIFI list.
Select the WIFI name you want to connect, authentication information is required if the selected
WIFI require security link. Please refer to your local network administrator for that authentication
information.
