Menu Operations
29
3.5.2 Factory Default
When you press [OK] on the
“
Factory Default
”
item:
A dialogue box will occur where you need to enter the password.
After you input the correct password a warning message will be displayed like the one beside.
If you select
“
Yes
”
then all changes you made will be reset to default values. Make sure you really
want to do this!
Press [Exit] in both steps will close the window without resetting the receiver.
NOTE: The default password is 000000.
3.5.3 S/W Upgrade by OTA
This function can upgrade the software of your receiver through data sent by a satellite. At the
moment we offer satellite updates only through ASTRA1 and Hotbird satellites.
1.
Select the satellite and TP or input the TP value and download PID.
2.
Then mark
“
Start
”
and press [Enter] to begin the download of the upgrade. This may need
up to 60 minutes. Therefore we suggest using of this function only if you don
’
t intent to
watch TV during this time.
