Star-Oddi DST microRF-HRT Скачать руководство пользователя страница 22 | Manualshive

Страница: 22 / 42

Star-Oddi DST microRF-HRT Скачать руководство пользователя страница 22

User Manual

Gná Graphic Supporting Software

©Star-Oddi 2015. All Rights Reserved

Page 22

7.

Working with groups and

programming the logger

Creating a group is a way to gather multiple measurement sequences which are part

of the same research project into one group. In a group the user can track when the

logger was started, the data retrieved and the data converted/reconverted.

Furthermore, groups can be transferred to PatternFinder for further data analysis.

Before implanting the DST microRF-HRT logger, the user must create a group for the

logger sequences, set a new measurement sequence and start the logger.

7.1

Creating a group

Select Group-New Group to create a new group (see figure 7.1).

Figure 7.1 Group menu

Please note that it is also possible to create a new group by clicking the New Group

button

in the group view pane.

The following window appears:

Figure 7.2 New Group

Name the group and enter a description. The group file will be saved under the

directory: C:\Mercury\Groups. Each group has its own subfolder where data files from

Distributed by MicroDAQ.com, Ltd. www.MicroDAQ.com (603) 746-5524

«
...
20
21
22
23
24
...
»

Содержание DST microRF-HRT











































Отзывы:

Нет отзывов