CIK Telecom INC
282 Consumers Road,
North York, ON, M2J 1P8
www.ciktel.com
2
）
To setup VPI/VCI and service types, please refer to the requirements of network service
supplier. Supposedly, VPI:0, VCI:35, then the service type is “UBR without PCR”.
3
）
After the setup, please press “Next” to enter connection types and packaging setting
page. Suppose that PPPoE protocol and LLC packaging mode are employed in this case
as shown below:
：
4
）
Please press “Next” after the setup to enter the dialing username/password setting
page as shown below. Supposedly, the username and password are 8163/8163.
