Star Micronics TSP400 Series, Руководство программиста

Страница: 31 / 136

– 28 –
PAGE MODE
7-3. Command Specification
Format Definition
FUNCTION
Clear format
CODE
<ESC> “C” <LF><NUL>
HEX
1B 43 0A 00
REMARKS
When the printer receives this command, all defined format and
image data are cleared.
The format defined by the following commands will be cleared by
<ESC> “C”.
<ESC> “D”
<ESC> “L” <ESC> “PC” <ESC> “PB”
<ESC> “Y” <ESC> “RC” <ESC> “RB” <ESC> “Q”
<ESC> “H” <ESC> “G” <ESC> “T” <ESC> “B”
EXAMPLE
LPRINT CHR$(&H1B);”C”;CHR$(&H0A);CHR$(&H00);
FUNCTION
Define print area
CODE
<ESC> “D n1n2n3n4” <LF> <NUL>
HEX
1B 44 n1n2n3n4 0A 00
REMARKS
This command defines the print area(page length) according to the
value of n1n2n3n4 in 1/10 mm unit.
When start position detect is OFF(memory switch #1 n2=0,
Default), defined print area is same as page length.
When start position detect is ON(memory switch #1 n2=1), page
length is automatically detected and set by either black mark
(when reflective sensor is selected) or a gap between each label
(when transmissive sensor is selected). So size of print area is
different from actual page length in this case.
n1n2n3n4 : Print area 0080 to 3000 (8 mm to 300 mm)