Star Micronics TSP100LAN, Руководство пользователя

Страница: 5 / 36

– 2 –
1-2. Choosing a place for the printer
Before actually unpacking the printer, you should take a few minutes to think about
where you plan to use it. Remember the following points when doing this.

Choose a firm, level surface where the printer will not be exposed to vibration.

The power outlet you plan to connect to for power should be nearby and unobstructed.

Make sure that the printer is close enough to your host computer for you to connect
the two.

Make sure that the printer is not exposed to direct sunlight.

Make sure that the printer is well away from heaters and other sources of extreme
heat.

Make sure that the surrounding area is clean, dry, and free of dust.

Make sure that the printer is connected to a reliable power outlet. It should not be on
the same electric circuit as copiers, refrigerators, or other appliances that cause power
spikes.

Make sure that the room where you are using the printer is not too humid .

This device emplo ys a DC motor and switches that have an electrical contact point.
Avoid using the de vice in environments where silicon gas can become volatile.
WARNING

Shut down your equipment immediately if it produces smoke, a strange odor, or un-
usual noise. Immediately unplug the equipment and contact your dealer for advice.

Never attempt to repair this product yourself. Improper repair work can be dangerous.

Never disassemble or modify this product. Tampering with this product may result
in injury, fire, or electric shock.