*1) Communication mode
It is possible to switch the communication mode setting between Bluetooth and USB.
Please see below for details to select the proper communication mode for your application.
USB :
[USB] is printed when a self test is executed. In the USB mode, USB communication
can be performed using the attached USB communication cable.
When you connect the serial cable, the printer is automatically switched to USB
communication from Bluetooth communication.
Bluetooth(Mac) :
[Bluetooth(Mac)] is printed when a self test is executed.
If you use MAC, Android and Windows device, please set communication mode to
[Bluetooth(Mac)].
Bluetooth(Auto) :
[Bluetooth(Auto)] is printed when a self test is executed.
If you use iOS device, please set communication mode to [Bluetooth(Auto)].
*2) Auto sleep function at communication mode [Bluetooth(Auto)] and USB mode
At communication mode [Bluetooth(Auto)] or USB mode, set the Auto sleep mode to “NO USE” or Auto
OFF mode.
When the printer recovers from sleep mode in communication mode [Bluetooth(Auto)] or USB mode,
a Bluetooth connection with the printer cannot be established. Therefore, it is impossible to use the
Auto sleep function when the Communication mode of the printer is set to communication mode
[Bluetooth(Auto)] or USB mode.
Simple method of switching over between Bluetooth (Auto) and Bluetooth(Mac) communication
modes
Press and hold the MODE button and the FEED button for at least five seconds until
ERROR lamp
flashes five times.
Continuously hold down the MODE button and the FEED button even until the buzzer sounds twice.
The Bluetooth communication mode switches.
Hold down the MODE button and
the FEED button until the buzzer
sounds twice.
Turn on the printer.
5 times
- 26 -