Star Micronics NP-345, Технические характеристики

Страница: 39 / 52

34
5.4 Page mode command table
Control command Function Page
1 ESC L n Print & edit selection 35
2 ESC M nx1 nx2 nx3 ny1 ny2 ny3 Print edit position setting 37
3 FF Print page feed 39
4 LF Line feed 39
5 ESC c Printer initialization 39
6 ESC I Print/edit clear 39
7 GS ~ Print density setting 39
8 ESC P n Print/edit page selection 39
9 ESC A n1 n2 Line space setting 40
10 ESC W n Character width enlarge setting 40
11 ESC w n Vertical enlarge print setting 40
12 ESC g n1 n2 Vertical/horizontal character enlarge set 40
13 SO w
Double width enlarge print setting with
auto reset
40
14 SO W
Quadruple enlarge print setting with auto
reset
40
15 ESC $ n1 n2 Absolute position setting 41
16 ESC * m n1 n2 Dn Bit image mode set 41
17 GS T n NV bit image pattern registration 43
18 ESC F n NV bit image double strike setting 43
19
GS b n1 nx1 nx2 nx3
ny1 ny2 ny3 n4 Dn LF
Barcode print edit 43
20 GS w n Barcode width setting 44
21 GS h n1 n2 Barcode height setting 44
22 GS H n HRI character print/edit setting 44
23 GS X n1 n2 n3 n4 Barcode modification total settings 44
24 ESC b n1 n2 n3 Black mark position margin setting 44
25 ESC v Send printer status 44
26 GS d Dn Firmware download 44
27 ESC S Line mode selection 45
* The characters covered in the section “ “ at the line mode command parameter are ASCII.
For example:
'1' ＝ 〔 31 〕 h
'02'
＝ 〔
30
〕
h
＋〔
32
〕
h
* The first line start position means the start position of the first line for print/edit direction
selected at that time.
* Items 20-23 are omitted due to command for Japanese Kanji settings.