Star Micronics BSC10 Series, Руководство по оборудованию

Страница: 15 / 24

- 11 -
3-6. Loading a Paper Roll
Use a paper roll that complies with the printer specifications. (See section 3-6-1, “Compliant Paper Roll Specifications”.)
1) Put your fingers in the grooves on either side of the printer, and open the rear cover.
3) Push on both sides of the rear cover to close it.
Note 1: Be sure not to close the rear cover by pushing only one side.
2: Be careful not to get your fingers caught when opening or closing the printer’s rear cover.
3: After the rear cover is closed, the printer performs initial operations (from paper feeding to paper cutting).
Do not open the rear cover until the initial operations are complete.
2) Load the paper roll into the printer in the direction indicated by the figure, and pull the leading edge of the paper straight
toward you.
Note 1: Pull the paper straight as you pull it out.
2: Be careful not to pull the paper out at an angle, because doing so may cause the paper to jam or skew.
Paper roll
Groove Rear cover