GENERAL INSTALLATION DATA
This equipment is designed and sold for commercial use only by personnel trained and experienced
in its operation and is not sold for consumer use in and around the home nor for use directly by the
general public in food service locations.
Before using your new equipment, read and understand all the instructions & labels associated with
the unit prior to putting it into operation. Make sure all people associated with its use understand the
units operation & safety before they use the unit.
All shipping containers should be checked for freight damage both visible and concealed. This
unit has been tested and carefully packaged to insure delivery of your unit in perfect condition. If
equipment is received in damaged condition, either apparent or concealed, a claim must be made
with the delivering carrier.
Concealed damage or loss - if damage or loss is not apparent until after equipment is unpacked, a
request for inspection of concealed damage must be made with carrier within 15 days. Be certain to
retain all contents plus external and internal packaging materials for inspection. The carrier will make
an inspection and will supply necessary claim forms.
WARNING: Improper installation, adjustment, alteration, service or maintenance
can cause property damage, injury or death. Read the installation, operating and
maintenance instructions thoroughly before installing or servicing the equipment.
This fryer is equipped for the voltage and wattage indicated on the nameplate mounted on the lower
right corner of the element housing. It is designed for use on alternating current (AC) only. It is
intended for use by properly trained personnel only.
DO NOT CONNECT TO DIRECT CURRENT (DC)
The installation of the appliance should conform to the:
NATIONAL ELECTRIC CODE AND ALL LOCAL ELECTRIC CODES AND
ORDINANCES AND THE LOCAL ELECTRIC COMPANY RULES AND
REGULATIONS
For your protection we recommend that a qualified electrician install this appliance. He should be
familiar with electrical installations and all electrical codes. Proper connections and power supply
are essential for efficient performance. The external wiring should be in conduit or an approved type
of flexible cable suitable for operation at 90° C (194° F) and of a proper size to carry the load. The
supply circuit should be properly fused and equipped with a means of disconnection, as required
by local electrical code. THE BODY OF THE APPLIANCE SHOULD BE GROUNDED -
DO NOT
GROUND TO A GAS SUPPLY LINE.
Four legs are provided and should be installed for ease of
cleaning. Level unit by adjusting the (4) feet which have an adjustment of 1-3/8" (34.92 mm) for
accurate leveling and perfect line-up with other units.
POWER SUPPLY
Models 530TF and 530TEF are wired at the factory for operation on a single phase power supply.
For specific wiring, check the wiring diagram.
WARNING
CAUTION
SPECIFICATIONS
Model
Voltage
kW
Amps
Dimensions
Weight
Width
Depth
Height
Installed
Shipping
530TF
208V
8,638
41.5
24”
24”
16.75” 69 lbs (31.3
kg
81 lbs (36.7
kg)
240V
11,500
47.5
530TEF
208V
6,910
33.2
240V
9,200
38.3
