-6-
FOR SYNCHRONIZATION BOTH LIGHTS MUST BE SET FOR THE SAME PATTERN TYPE!
PATTERNS
The ULB9E Series lights are designed with 12 different
patterns
in one of two
phases
. To
change patterns, press and release the Pattern Select Button or touch and release the
Green wire to ground.
Note: The second phase will only be noticeable when synchronizing two of the ULB9E-1
lights
(hardwire versions only)
.
Phase 1
Flash
Pattern
Phase 2
Flash
Pattern
Pattern
Type
Pattern Description
Shortcut
1
13
K
Flicker
Pattern 1
(Phase 1)
:
3 sec or 1 flash
Pattern 13
(Phase 2)
:
9 sec or 3 flashes
2
14
L
Fast Doubleflash
3
15
M
Tripleflash
4
16
N
PSU Flicker
5
17
O
PSU Random
6
18
F
Quadflash
†
Pattern 6
(Phase 1)
:
6 Sec or 2 flash
Pattern 18
(Phase 2)
:
12 sec or 4 flashes
7
19
G
Quadflash w/Post-Pop
†
8
20
H
Singleflash
†
9
21
I
Doubleflash
†
10
22
J
Variable AKA Delta-Omega
11
23
C
Post Pop
12
24
E
Random
NA
Steady
18Sec
Pattern Shortcuts:
Hold Pattern Select Button
or hold Green wire to
ground for indicated time.
Steady Burn:
Not in pattern cycle. Only
accessible through shortcut. Hold
Pattern Select Button or hold
Green wire to ground for 18
seconds (light will flash 6 times)
(Programming CONT’D)
SYNCHRONIZATION
You can synchronize up to 6 lights with compatibility, using the same Pattern Type.
DO NOT CONNECT WHITE WIRES
UNTIL PROGRAMMING HAS BEEN
COMPLETED FOR ALL LIGHTS!!
1. Power up the first unit and select
a Phase 1 pattern. Touch and
release the green wire to ground
to change patterns.
2. Program the second light with
the same
Pattern Type
.
Lights with the SAME phase
flash together (simultaneous).
Lights with DIFFERENT phases
flash opposite one another
(alternate).
3. After programming all lights, tie
off the green wires and connect
the white wires together.
4. Test lights by applying power to
all of them at the same time.
