Star Headlight & Lantern Star Half Phantom ULB14, Руководство по установке

Страница: 4 / 8

-3-
Operating Instructions
Pattern Select
The button in the left side of the light is the Pattern Select button. Each time this
switch-button is depressed, the
Star Half Phantom
will cycle to the next pattern.
The
Star Half Phantom
is designed with thirty-five different patterns (see next
page) :
Indicator LED
Located on the bottom of the
Star Half Phantom
is an Indicator LED. When your
light is activated, this LED will light up.
This light may be optionally de-activated if you wish. To do this, while the light is
running, hold down the Pattern Select Button for approximately 12 seconds, until the
light flashes 4 times. This will disable (or enable) the indicator LED.
The Star Half Phantom
is designed for simple operation using two switches. It has a
switched cig plug for On/Off control, and a Pattern Select Button.
Pattern Select
Switched
Cig Plug
All wires connected to the positive terminal of the battery should be fused at the
battery for their rated load.
Testing the light before this fuse is properly
installed will void the warranty on the light.