8
SPL-NXC18UA
Operation (cont’d)
SHREDDING:
The unit will automatically start shredding when paper is inserted into the unit.
Paper Feed:
1. To shred paper, insert up to 18 sheets straight into the paper slot.
2. To shred credit cards, CD’s or DVD’s insert one piece at a time into the
center of the paper slot.
3. Forward: Press and hold the forward button
on the front control panel.
The Green LED will light indicating the shredder is now in the forward mode,
and the motor will move in forward to feed paper into the slot.
4. Reverse: Press and hold the reverse button
on the front control panel.
The shredder is now in the reverse mode, and the motor will move in reverse
to push out paper.
USB Flash Drive Shredding:
1. Open the USB flash drive compartment cover by pressing down once.
2. Insert one USB flash drive at a time into the center of the feed entry.
Be careful not to place your hands near the feed opening to prevent
any injuries.
3. Close the USB flash drive compartment cover by pressing down once.
4. Press and HOLD the USB flash drive shredding button
on the front
control panel to start shredding. The Green LED will light indicating
shredding is in progress. Once shredding is complete, release the USB flash
drive shredding button
. Check waste bin to ensure that USB flash drive
has been destroyed.
NOTE: If jam occurs, you will hear the motor stop momentarily, then
start again (the slot will automatically release the USB flash drive into
the waste bin). If this happens, wait until the motor stops completely,
remove unshredded USB flash drive from waste bin, and repeat steps
#1-4 above.
The machine will shred one USB flash drive at a time. It can shred casing
material made of bamboo, metal/aluminium or metal/plastic (thickness must
not exceed 0.02 in. [0.55mm]), hard plastic and rubber. The USB flash drive size
must not exceed 1.18 x 0.66 x 3.14 in. (30 x 17 x 80mm).
The USB flash drive function is based on the typical consumer’s disposal
rate of USB flash drives (defined as one per month on average). It is NOT
designed or intended for high-volume destruction of USB flash drives.
Overuse of this function will result in failure.
For the safety of children and pets, always turn the shredder off by pressing
the power button (
), and unplugging the unit when it is unattended or
not in use.
Содержание SPL-NXC18UA
Страница 1: ...SPL NXC18UA HEAVY DUTY 18 SHEET CROSS CUT SHREDDER Separate Slot For Shredding USB Flash Drives...
Страница 12: ......
Страница 24: ......
Страница 36: ......