McMullen | Winkler,
Waves Records
setup, p.2
horizontally (floats freely).
d.
Refasten the tonearm with the arm clamp.
e.
Hold the counterweight stationary with one hand and rotate only the stylus-
pressure ring to bring the number "0" of the ring into alignment with the center
line on the tonearm rear shaft.
f.
Rotate the counterweight clockwise until the scale shows the value
corresponding to the pressure of the used stylus. The average stylus pressure of
the cartridge body is 1.5-2 g.
II. Connecting the STR8-30 turntable to the mixer
1.
Unpack the mixer and connect the power cord
(ATTENTION: the supplied wall
adapter only works with 120VAC, it transforms the power to 15VAC, 500mA).
2.
Connect the RCA and the ground cables from the turntable to the mixer (see
picture below):
The RCA cables go into the PHONO 1 jacks, the Ground cable to the GND
connector
3.
Connect the headphones to the headphone jack on the mixer’s front panel
power
PHONO 2
GND
