background image

 

2

   

1.  Read Instructions – All the safety and operating instructions should 

be read before this product is operated. 

2.  Retain Instructions – The safety and operating instructions should be 

retained for future reference. 

3.  Heed Warnings – All warnings on the appliance and in the operating 

instructions should be adhered to. 

4.  Follow Instructions – All operating and use instructions should be 

followed. 

5.  Water and Moisture – The appliance should not be used near water 

- for example, near a bathtub, washbowl, kitchen sink, laundry tub, in 

a wet basement, or near a swimming pool, and the like. 

6.  Wall or Ceiling Mounting – The product should be mounted to a wall 

or ceiling only as recommended by the manufacturer. 

7.  Heat – Appliance should be situated away from heat sources such as 

radiators, heat registers, stoves, or other appliances (including 

amplifiers) that produce heat. 

8.  Power Sources – This product should be operated only from the type of 

power source indicated on the rating label. If you are not sure of the 

type of power supply to your home, consult your product dealer or 

local power company. For products intended to operate from battery 

power, or other sources, refer the operating instructions. 

9.  Grounding or Polarization – This product may be equipped with a 

polarized alter-nation-current line plug (a plug having one blade 

wider than the other). This plug will fit into the power outlet only one 

way. This is a safety feature. If you are unable to insert the plug fully 

into the outlet, try reversing the plug. If the plug should still fail to fit, 

contact your electrician to replace your obsolete outlet. Do not defeat 

the safety purpose of the polarized plug. 

10. Power-Cord Protection – Power-supply cords should be routed so 

that they are not likely to be walked on or pinched by items placed 

upon or against them, paying particular attention to the cord in 

correspondence of plugs, convenience receptacles, and the point 

where they exit from the appliance. 

11. Cleaning - The appliance should be cleaned only as recommended by 

the manufacturer. Clean by wiping with a cloth slightly damp with 

water. Avoid getting water inside the appliance. 

12.  For AC line powered units - Before returning repaired unit to user, use 

an ohm-meter to measure from both AC plug blades to all exposed 

metallic parts. The resistance should be more than 100,000 ohms 

13. Non-use Periods – The power cord of the appliance should be 

unplugged from the outlet when left unused for a long period of time. 

14. Object and Liquid Entry – Care should be taken so that objects do 

not fall and liquids are not spilled into the enclosure through openings. 

15. Damage Requiring Service – The appliance should be serviced by 

qualified service personnel when:   

A.  The power-supply cord or the plug has been damaged; or 
B. Objects have fallen, or liquid has been spilled into the appliance; or 
C. The appliance has been exposed to rain; or   
D. The appliance does not appear to operate normally or exhibits a   

marked change in performance; or 

E. The appliance has been dropped, or the enclosure damage 

16. Servicing –The user should not attempt any service to the appliance 

beyond that described in the operating instructions. All other servicing 

should be referred to qualified service personnel.. 

17. Ventilation – Slots and openings in the cabinet are provided for 

ventilation and to ensure reliable operation of the product and to 

protect it from overheating, and these openings must not be blocked 

or covered. The openings should never be blocked by placing the 

product on a bed, sofa, rug, or other similar surface. This product 

should not be placed in a built-in installation such as a bookcase or 

rack unless proper ventilation is the manufacturer’s instructions have 

been adhered to. 

18. Attachments – do not use attachments not recommended by the product 

manufacturer as they may cause hazards. 

19. Accessories – Do not place this product on an unstable cart, stand, 

tripod, bracket, or table. The product may fall, causing serious injury 

to a child or adult, and serious damage to the product. Use only with a 

cart, stand, tripod, bracket, or table recommended by the 

manufacturer, or sold with the product. Any mounting of the product 

should follow the manufacturer’s instructions, and should use 

amounting accessory recommended by the manufacturer. 

20. Lightning – For added protection for this product during a lightning 

storm, or when it is left unattended and unused for long periods of time, 

unplug it from the wall outlet and disconnect the antenna or cable 

system. This will prevent damage to the product due to lightning and 

power-line surges. 

21. Replacement Parts – When replacement parts are required, be sure 

the service technician has used replacement parts specified by the 

manufacturer or have the same characteristics as the original part. 

Unauthorized substitutions may result in fire, electric shock, or other 

hazards. 

22. Safety Check – Upon completion of any service or repairs to this 

product, ask the service technician to perform safety checks to 

determine that the product is in proper operating condition. 

23. 

This product is in compliance with EUWEEE 

regulations. Disposal of end of life product should not 

be treated as municipal waste. Please refer to your 

local regulations for instructions on proper disposal of 

this product. 

24. Carts and Stands – The appliance should be used only 

with a cart or stand that is recommended by the 

manufacturer. An appliance and cart combination 

should be moved with care. Quick stops, excessive 

force, and uneven surfaces may cause the appliance 

and cart combination to overturn 

 

 
  

 

 

 

 

 

 

 
 
 
 
 
 
 
 
 
 
 
 
 

CAUTION:

To reduce the risk of electric shock, do not remove any

cover. No user-serviceable parts inside. Refer servicing to qualified

service personnel only.

The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the use to the

presence of un-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient

magnitude to constitute a risk of electric shock.

The exclamation point within the equilateral triangle is intended to alert the user to the presence of important

operation and maintenance (servicing) instructions in the literature accompanying this appliance. 

CAUTION:

 To prevent electric shock, do not use this polarized plug with an extension cord, receptacle or other outlet

unless the blades can be fully inserted to prevent blade exposure.

            
RISK OF ELECTRIC SHOCK

DO NOT OPEN

IMPORTANT SAFETY PRECAUTIONS

Содержание S-300











Отзывы: