Stanton S.252, Руководство пользователя

Страница: 3 / 8

FUNCTIONS
NOTE ON USE
2
• Allow for sufficient heat dispersion when installed on a rack.
• Handle the power cord carefully.
• Hold the plug when unplugging the cord.
• Keep the set free from moisture, water, and dust.
• Unplug the power cord when not using the set for long periods of time.
• Do not obstruct the ventilation holes. (For sets with ventilation holes.)
• Do not let foreign objects in the set.
• Do not let insecticides, benzene, and thinner come in contact with the set.
• Never disassemble or modify the set in any way.
1) EJECT : Opens the C
D
door
2) STOP : Stops the CD.
3) SKIP : Skips through the tracks on the CD, forward or
back.
4) : Scans forward or back through the
current
track. This unit features 3 scan speeds. Keep
the or
button pressed for a few seconds
to change the
scan speed.
5) PLAY/PAUSE : Plays or pauses the CD. Autocue func-
tion sets the cue point automatically when this button is
used.
6) CUE : Used to recall and preview the cue point.
7) TIME : LCD display reads the time remaining
or
time
elapsed, according to this button.
8)
PITCH:
Turns pitch fader ON and OFF.
9) PITCH SELECT : Pressing the PITCH and PITCH
BEND - (minus) buttons simultaneously changes the
pitch fader range b/- 8, 12, and 16%.
10) PITCH BEND :
Maximum pitch on this unit is 16%. If
the pitch fader is already physically set to 16%, this
function will not work.
: Switches between Single or Continuous
play modes.
11) SGL/CTN
12) LOOP : Press once to set starting loop point, press
again set ending point and enter loop. Press a third
time to exit loop.
13) LCD DISPLAY : Shows time (minutes, seconds,
frame), and pitch information.
14) PITCH FADER : Used to speed up or slow down cur-
rent track.
15) AUDIO OUT : This stereo line output connects to the
line input on any DJ mixer.
16) DIGITAL OUTPUT : This coaxial (S/P DIF) digital out-
put connects to any RCA S/P DIF input, as found on
most standard computer sound cards or CD burners.
17) FADER START : Connects to any DJ mixer equipped
with a fader start input. This enables the user to start
the CD from the cue point, using the mixer’s cross or
line fader, depending on the mixer.
18) VOLTAGE SELECTOR : Used to select the unit’s volt-
age according to the local setting. Note: The voltage
should preset correctly from the factory, however,
make sure to check it before powering the unit.
19) AC IN : This is the connection for the supplied power
cable.
20) POWER : This button is used to power the unit ON and
OFF.
2
1) PHONES :
Use this stereo jack to connect a pair
of headphones.
*Just for Dual Voltage model only.