Stanton KCDJ110 Скачать руководство пользователя страница 3

  IMPORTANT SAFETY INSTRUCTIONS

 

 
1.  Read Instructions – All the safety and operating 

instructions should be read before this product is 
operated. 

2. Retain Instructions 

 The safety and operating 

instructions should be retained for future reference. 

3. Heed 

Warnings 

 All warnings on the appliance and 

in the operating instructions should be adhered to. 

4. Follow  Instructions 

 All operating and use 

instructions should be followed. 

5.  Water and Moisture 

 The appliance should not be 

used near water - for example, near a bathtub, 
washbowl, kitchen sink, laundry tub, in a wet 
basement, or near a swimming pool, and the like. 

6.  Carts and Stands 

 The appliance should be used 

only with a cart or stand that is recommended by the 
manufacturer. 
An appliance and cart combination 
should be moved with care. Quick stops, 
excessive force, and uneven surfaces 
may cause the appliance and cart 
combination to overturn. 

7.  Wall or Ceiling Mounting 

 The product should be 

mounted to a wall or ceiling only as recommended by 
the manufacturer. 

8. Heat 

 The appliance should be situated away from 

heat sources such as radiators, heat registers, stoves, 
or other appliances (including amplifiers) that produce 
heat. 

9.  Power Sources – This product should be operated 

only from the type of power source indicated on the 
rating label. If you are not sure of the type of power 
supply to your home, consult your product dealer or 
local power company. For products intended to 
operate from battery power, or other sources, refer the 
operating instructions. 

10. Grounding or Polarization – This product may be 

equipped with a polarized alternation-current line plug 
(a plug having one blade wider than the other). This 
plug will fit into the power outlet only one way. This is 
a safety feature. If you are unable to insert the plug 
fully into the outlet, try reversing the plug. If the plug 
should still fail to fit, contact your electrician to replace 
your obsolete outlet. Do not defeat the safety purpose 
of the polarized plug. 

11. Power-Cord  Protection

Power-supply cords should 

be routed so that they are not likely to be walked on or 
pinched by items placed upon or against them, paying 
particular attention to the cord in correspondence of 
plugs, convenience receptacles, and the point where 
they exit from the appliance. 

12. Cleaning - The appliance should be cleaned only as 

recommended by the manufacturer. 

Clean by wiping with a cloth slightly damp with water. 

Avoid getting water inside the appliance. 

13. For AC line powered units - Before returning repaired 

unit to user, use an ohm-meter to measure from both 
AC plug blades to all exposed metallic parts. The 
resistance should be more than 100,000 ohms. 

14. Non-use Periods

The power cord of the appliance 

should be unplugged from the outlet when left unused 
for a long period of time. 

15.  Object and Liquid Entry

Care should be taken so 

that objects do not fall and liquids are not spilled into 
the enclosure through openings. 

16. Damage Requiring Service

The appliance should be 

serviced by qualified service personnel when: 

A. The power-supply cord or the plug has been 

damaged; or 

B.  Objects have fallen, or liquid has been spilled into 

the appliance; or 

C.  The appliance has been exposed to rain; or  
D. The appliance does not appear to operate 

normally or exhibits a marked change in 
performance; or 

E.  The appliance has been dropped, or the enclosure 

damaged. 

17. Servicing

The user should not attempt any service to 

the appliance beyond that described in the operating 
instructions. All other servicing should be referred to 
qualified service personnel. 

18. Ventilation – Slots and openings in the cabinet are 

provided for ventilation and to ensure reliable 
operation of the product and to protect it from 
overheating, and these openings must not be blocked 
or covered. The openings should never be blocked by 
placing the product on a bed, sofa, rug, or other 
similar surface. This product should not be placed in a 
built-in installation such as a bookcase or rack unless 
proper ventilation is the manufacturer’s instructions 
have been adhered to.  

19. 

Attachments – do not use attachments not 
recommended by the product manufacturer as they 
may cause hazards. 

20. Accessories – Do not place this product on an 

unstable cart, stand, tripod, bracket, or table. The 
product may fall, causing serious injury to a child or 
adult, and serious damage to the product. Use only 
with a cart, stand, tripod, bracket, or table 
recommended by the manufacturer, or sold with the 
product. Any mounting of the product should follow the 
manufacturer’s instructions, and should use a 
mounting accessory recommended by the 
manufacturer. 

21. Lightning – For added protection for this product 

during a lightning storm, or when it is left unattended 
and unused for long periods of time, unplug it from the 
wall outlet and disconnect the antenna or cable 
system. This will prevent damage to the product due 
to lightning and power-line surges. 

22. Replacement Parts – When replacement parts are 

required, be sure the service technician has used 
replacement parts specified by the manufacturer or 
have the same characteristics as the original part. 
Unauthorized substitutions may result in fire, electric 
shock, or other hazards. 

23. Safety Check – Upon completion of any service or 

repairs to this product, ask the service technician to 
perform safety checks to determine that the product is 
in proper operating condition.

 

 
 

 

Содержание KCDJ110
















Отзывы: