OPERATIONS
11. Matching the Beats Per Minute (BPM
)
There are two tools available for matching the BPM of the two CDs:
Use the pitch slider to adjust the BPM.
Turn the JOG dial to change the BPM temporarily.
1) Pitch
Slider
To adjust the BPM by sliding the pitch slider up or down, press the PITCH button to turn on the PITCH adjustment
function before using.
Slide the pitch slider up to decrease BPM, or down to increase BPM.
2) Turn the JOG dial
Turn the jog dial clockwise during play to increase the BMP in the forward direction, counterclockwise to decrease
the BMP in the reverse direction. The faster you turn the wheel, the more the BMP changes. The BMP changes with
a range of +/-16%.
When you release jog wheel, the CD will return to the tempo indicated by the pitch slider.
12. Program play
Press the PROGRAM button, the player will enter the program mode and the CD will stop rotating.
Select the desired track by pressing the SKIP button, then press the PROGRAM button again. The selected
track will be added to the program sequence.
Repeat step 2 operation. A maximum of 20 tracks can be programmed at one time.
Press the PLAY/PAUSE button to start the program play from the first selection.
Press the program button again during program play to stop play.
Press and hold the program button more than 2 seconds to cancel the program mode and erase all the current
program
contents.
13. Loop Play
You can create a seamless loop between two points continuously.
a-
Press PLAY/PAUSE BUTTON so a CD is playing.
The PLAY/PAUSE BUTTON’S LED lights.
b-
Press IN/R.CUE BUTTON . This sets the starting point of the SEAMLESS LOOP. The IN/R.CUE BUTTON LED will
light.
c-
Press OUT/EXIT BUTTON to set desired ending point of the SEAMLESS LOOP. You will know you are in
SEAMLESS LOOP mode because IN/R.CUE and OUT/EXIT LED will light and flash. Sound will continue with no
interruption (SEAMLESS LOOP).
9
