background image

 

2

SAFETY INSTRUCTIONS 

 
1.  Read Instructions  – All the safety and operating 

instructions should be read before this product is 
operated. 

2.  Retain Instructions 

 The safety and operating 

instructions should be retained for future reference. 

3.  Heed Warnings 

 All warnings on the appliance and in 

the operating instructions should be adhered to. 

4.  Follow Instructions 

 All operating and use instructions 

should be followed. 

5.  Water and Moisture 

 The appliance should not be 

used near water  - for example, near a bathtub, 
washbowl, kitchen sink, laundry tub, in a wet basement, 
or near a swimming pool, and the like. 

6.  Carts and Stands 

 The appliance should be used 

only with a cart or stand that is recommended by the 
manufacturer. 
An appliance and cart combination should 
be moved with care. Quick stops, 
excessive force, and uneven surfaces may 
cause the appliance and cart combination 
to overturn. 

7.  Wall or Ceiling Mounting 

 The product should be 

mounted to a wall or ceiling only as recommended by 
the manufacturer. 

8.  Heat 

 The appliance should be situated away from 

heat sources such as radiators, heat registers, stoves, or 
other appliances (including amplifiers) that produce heat. 

9.  Power Sources – This product should be operated only 

from the type of power source indicated on the rating 
label. If you are not sure of the type of power supply to 
your home, consult your product dealer or local power 
company. For products intended to operate from battery 
power, or other sources, refer the operating instructions. 

10. Grounding or Polarization  – This product may be 

equipped with a polarized alternation-current line plug (a 
plug having one blade wider than the other). This plug 
will fit into the power outlet only one way. This is a safety 
feature. If you are unable to insert the plug fully into the 
outlet, try reversing the plug. If the plug should still fail to 
fit, contact your electrician to replace your obsolete 
outlet. Do not defeat the safety purpose of the polarized 
plug. 

11. Power-Cord Protection

Power-supply cords should be 

routed so that they are not likely to be walked on or 
pinched by items placed upon or against them, paying 
particular attention to the cord in correspondence of 
plugs, convenience receptacles, and the point where 
they exit from the appliance. 

12. Cleaning  - The appliance should be cleaned only as 

recommended by the manufacturer. 
Clean by wiping with a cloth slightly damp with water. 
Avoid getting water inside the appliance. 

13.  For AC line powered units  - Before returning repaired 

unit to user, use an ohm-meter to measure from both AC 
plug blades to all exposed metallic parts. The resistance 
should be more than 100,000 ohms. 

14.  Non-use Periods

The power cord of the appliance 

should be unplugged from the outlet when left unused 
for a long period of time. 

15.  Object and Liquid Entry

Care should be taken so that 

objects do not fall and liquids are not spilled into the 
enclosure through openings. 

16. Damage Requiring Service

The appliance should be 

serviced by qualified service personnel when: 

A.  The power-supply cord or the plug has been 

damaged; or 

B.  Objects have fallen, or liquid has been spilled into 

the appliance; or 

C.  The appliance has been exposed to rain; or   
D.  The appliance does not appear to operate normally 

or exhibits a marked change in performance; or 

E.  The appliance has been dropped, or the enclosure 

damaged. 

17. Servicing

The user should not attempt any service to 

the appliance beyond that described in the operating 
instructions. All other servicing should be referred to 
qualified service personnel. 

18. Ventilation  – Slots and openings in the cabinet are 

provided for ventilation and to ensure reliable operation 
of the product and to protect it from overheating, and 
these openings must not be blocked or covered. The 
openings should never be blocked by placing the 
product on a bed, sofa, rug, or other similar surface. This 
product should not be placed in a built-in installation 
such as a bookcase or rack unless proper ventilation is 
the manufacturer’s instructions have been adhered to.   

19. Attachments 

– do not use attachments not 

recommended by the product manufacturer as they may 
cause hazards. 

20. Accessories  – Do not place this product on an unstable 

cart, stand, tripod, bracket, or table. The product may fall, 
causing serious injury to a child or adult, and serious 
damage to the product. Use only with a cart, stand, 
tripod, bracket, or table recommended by the 
manufacturer, or sold with the product. Any mounting of 
the product should follow the manufacturer’s instructions, 
and should use a mounting accessory recommended by 
the manufacturer. 

21. Lightning – For added protection for this product during 

a lightning storm, or when it is left unattended and 
unused for long periods of time, unplug it from the wall 
outlet and disconnect the antenna or cable system. This 
will prevent damage to the product due to lightning and 
power-line surges. 

22. Replacement Parts  – When replacement parts are 

required, be sure the service technician has used 
replacement parts specified by the manufacturer or have 
the same characteristics as the original part. 
Unauthorized substitutions may result in fire, electric 
shock, or other hazards. 

23. Safety Check  – Upon completion of any service or 

repairs to this product, ask the service technician to 
perform safety checks to determine that the product is in 
proper operating condition.

Содержание C.501
















Отзывы: