AC POWER:
LED indicator turns on when
power is being supplied to the adapter.
USB:
LED indicator turns on when your
USB device is charging.
Power Indicators:
AC POWER
USB
To replace the Universal Travel Adapter’s power protection fuse, please
follow the instructions below:
Release
USB
POWER POR
T
1. Access the spare fuse in the red compartment shown in figure A by lifting the
tray with a pointy object.
2. Access the blown fuse as shown in figure B.
3. Insert the fuse back into the red holding tray and push the tray back into place.
(Placing the fuse back in without the holding tray will prevent you from being able
to push the tray back into place.)
Fig. A
Fig. B
English
• DO NOT ATTEMPT TO DISASSEMBLE
• DO NOT EXPOSE TO LIQUID OR MOISTURE OR HUMIDITY
• DO NOT USE WITH HIGH POWER PRODUCTS SUCH AS REFRIGERATOR,
ELECTRIC HEATER ETC
• DO NOT USE WITH ELECTRIC DEVICES DEMAND POWER OVER 125V/6A
OR 250V/3A
• DO NOT USE WHERE CONDITION IS INSTABLE, SUCH AS TOP OF A
MOVING OBJECT, SHAKY TABLE ETC
• DO NOT PUT METAL FRAGMENT (E.G. SUCH AS WIRE) INSIDE.
• KEEP AWAY FROM REACH OF CHILDREN
• DO NOT LEAVE ADAPTER/PLUG IN THE POWER SOCKET AFTER USE.
• DO NOT HANDLE WITH WET HANDS
• UNPLUG IMMEDIATELY SHOULD THERE BE ANY ABNORMALITIES SUCH
AS SMOKE, SMELL
• USE ONLY AS INSTRUCTED BY THE INSTRUCTION MANUAL
• FOR INDOOR USE ONLY
WARNING
AC power rating:
3A Max. 100-250VAC
3A Max. 330W @ 110V, 690W Max. @ 230V
Fuse A & B: 3A
USB power rating: USB 1A
Single USB Charging Port: 5/1000mA
SPECIFICATIONS
Содержание WY-06
Страница 1: ......
