Stanley SXPW2601S Скачать руководство пользователя страница 4

4

5

As soon as you have purchased the pressure washer, we 

recommend that you check to make sure it is intact and 

that you read the operating instructions carefully before 

using it.  The purchase receipt for this product is to be 

retained and must be presented if making a claim under 

the terms of the Smart Marketing Group (SMG) warranty. 

Bank account statements are not acceptable for proof  

of purchase.
This warranty does not cover pressure washers intended 

for hire or use in commercial applications or in commercial 

premises.  The warranty will under no circumstances 

extend to reimbursement or payment of damages, whether 

direct, indirect or consequential.  The warranty is void if 

there is evidence the pressure washer has been modified 

or tampered with in any way or used with unauthorised 

accessories without our consent.
SMG declines any responsibility or liability whatsoever 

arising from misuse or abuse, negligent handling of the 

pressure washer or if the product has not been installed 

or failure to comply with the relevant safety, operating, 

setting and maintenance instructions (see further in  

this manual).
The warranty does not extend to installation or 

disconnection costs.
Any item sent freight forward/collect for repair will be 

refused.  Warranty repairs are free of charge, provided 

the appliance is delivered to our service department or 

authorised service agent.  The pressure washer will need 

to be returned, adequately protected in a box.  SMG 

will not be responsible for any in-transit loss or damage.  

Assistance under the warranty will only be made available 

if the request is made to our customer service team on the 

contact numbers listed below and proof of purchase  

is provided.
This is a repair only warranty you will need to take the 

pressure washer to the authorised service agent after 

contacting our customer service centre.
If the product includes various accessories or components, 

only the defective accessory or component will be replaced 

or repaired.
SMG reserves the right to replace defective parts of the 

product with parts and components of similar quality, 

grade and composition where an identical part or 

component is not available.
Products presented for repair may be replaced by 

refurbished products of the same type rather than  

being repaired.  Refurbished parts may be used to  

repair the products.
Damage caused by third party accessories is not covered 

under this warranty.
Damage caused to attached equipment or third party 

accessories will not be covered under this warranty.
Rust and corrosion are not covered under this warranty.

If a warranty fault is found, the freight cost will be credited 

to the owner.  If no fault is found, the product will be 

returned and any costs associated with the service will be 

charged to the owner.
Blockages caused by spider webs, insects, dirt, 

accumulated dust or incorrect oil are not covered by 

warranty.  SMG reserves the right to replace or repair the 

appliance within the warranty period. Parts found to be 

defective due to a manufacturing fault will be replaced free 

of charge.
In the event of SMG choosing to replace the product, the 

warranty will expire at the original date of purchase.  If no 

warranty fault is found the owner will be advised and the 

product will be returned and any costs associated with the 

service will be charged to the owner.
Our goods come with guarantees that cannot be excluded 

under the Australian Consumer Law.  You are entitled 

to a replacement or refund for a major failure and for 

compensation for any other reasonably foreseeable loss or 

damage.  You are also entitled to have the goods repaired 

or replaced if the goods fail to be of acceptable quality 

and the failure does not amount to a major failure.  The 

benefits of this warranty are in addition to any rights 

and remedies imposed by Australian State and Federal 

legislation that cannot be excluded.
In New Zealand, this SMG warranty is in addition to the 

conditions and guarantees which are mandatory as implied 

by the New Zealand Consumer Guarantee Act 1993. For 

service, spare parts or product information please contact 

customer service:
Australia: 1300 660 457
New Zealand: 0800 474 876

CONTACT DETAILS

Smart Marketing Group Pty Ltd
33-35 Lionel Road, Mt. Waverley
Victoria 3149, Australia.
Tel (+613) 9543 7266
Fax (+613) 9543 9839
[email protected]

COMPLETE WARRANTY STATEMENT – PRESSURE WASHER

Содержание SXPW2601S

























Отзывы: