background image

10

11

PACKING CONTENTS (FIG. 1) 

•   Blower assembly.  

•   Screwdriver (1). 

•   Upper blower tube. 

•   Wrench for spark plug (1). 

•   Lower blower tube. 

•   Bottle of engine oil. 

•   Operator’s manual.

 

WARNING. 

To prevent an accidental start that  

 could cause serious personal injury, always  
 disconnect the engine spark plug wire from the spark  

 

plug when assembling parts.

 WARNING. 

If any parts are damaged or missing do  

 not operate this product until the parts are replaced.  
 Use of the product with damaged or missing parts could  

 

result in possible serious personal injury.

 WARNING. 

Do not attempt to modify this product   

 or create accessories not recommended for use with  

 

this product. Any such alteration or modification is  

 

misuse and could result in a hazardous condition  

 

leading to possible serious personal injury.

 

WARNING. 

This product is intended for blower use  

 only and is not designed for vacuum use. Do not attempt  

 

to open the air inlet cover that covers the impeller.  

 

Opening the air inlet cover may result in contact with  

 

the impeller blades and cause serious personal injuries.

ASSEMBLING THE BLOWER TUBES

Align the raised tabs on the lower blower tube to the slots on 
the upper blower tube, slide together and tighten securely by 
twisting. Check the tightness after initial use and retighten if 
needed  To remove the tubes, rotate the upper blower tube and 
remove from the lower blower tube. Insert the upper blower 
tube to the engine air tube (2) and lock the tube by turning 90 
degree (1), Fig.2.

The lower air tube should be connected to the upper air tube in 
the same way.

CAUTION.  

This packaging contains sharp objects. Take care when 
unpacking. Remove the machine, together with the 

accessories supplied, from the packaging. Check carefully to 
ensure that the machine is in good condition and account for all 
the accessories listed in this manual. Also make sure that all the 
accessories are complete.

UNPACKING

ASSEMBLY

If any parts are found to be missing, please contact customer 
service (details on page 5). Do not throw the packaging away, 
keep it safe throughout the warranty period, then recycle if 
possible, otherwise dispose of it by the proper means. Do not 
let children play with empty plastic bags due to the risk of 
suffocation.

1

2

Fig. 1

1

2

Fig. 2

Содержание SXPG42603





















Отзывы: