(Original instructions)
ENGLISH
5
USING AN EXTENSION CABLE
If it is necessary to use an extension cable, please used an
approved extension cable that fits the tool’s power input
specifications. The minimum cross-sectional area of the
conducting wire is 1.5 sq. mm. Cables should be untangled
before reeling up.
.
LABELS ON TOOL
The label on your tool may include the following symbols:
Position of date code
The date code, which also includes the year of manufacture,
is printed into the housing.
Example:
2017 XX JN
Year of manufacturing
PACKAGE CONTENTS
The package contains:
1 Heat gun
1 Instruction manual
• Check for damage to the tool, parts or accessories which
may have occurred during transport.
• Take the time to thoroughly read and understand this
manual prior to operation.
FEATURES (Fig A)
1. Switch
2. Heat control knob
3. Ventilation slots
4. Nozzle
ASSEMBLY
WARNING!
Before assembly, make sure that the
tool is switched off and unplug.
Handling your heat gun
Do not place your hand over the ventilation slots (3) or block
these vents in any way. This restricts the airflow through the
element and causes over heating.
Cable cross-sectional
area (mm
2
)
Cable rated
current (Ampere)
0.75
6
1.00
10
1.50
15
2.50
20
4.00
25
Voltage
Amperes
Cable rated current (Ampere)
110-127
0 - 2.0
6
6
6
6
6
10
2.1 - 3.4
6
6
6
6
15 15
3.5 - 5.0
6
6
10 15 20 20
5.1 - 7.0
10 10 15 20 20 25
7.1 - 12.0
15 15 20 25 25
-
12.1 - 20.0 20 20 25
-
-
-
220-240
0 - 2.0
6
6
6
6
6
6
2.1 - 3.4
6
6
6
6
6
6
3.5 - 5.0
6
6
6
6
10 15
5.1 - 7.0
10 10 10 10 15 15
7.1 - 12.0
15 15 15 15 20 20
12.1 - 20.0 20 20 20 20 25
-
Cable length (m)
7.5 15
25
30
45
60
WARNING! To reduce the risk of injury, the user
must read the instruction manual before use.
Wear ear protection.
Wear safety glasses or goggles.
V
Volts
Direct Current
A
Amperes
n
0
No-Load Speed
Hz
Hertz
Class II Construction
W
Watts
Earthing Terminal
min
minutes
Safety Alert Symbol
Alternating
Current
/min.
Revolutions or
Reciprocation per
minute
