11
ENGLISH
(Original instructions)
• Tighten the locking knob.
Removing
• Loosen the locking knob.
• Pull the rip fence out of the tool. Note: If you do not have
a proper fitting fence, use a straight edge guide in
contact with the edge of the shoe to improve accuracy of
cut and reduce the possibility of binding and kickback.
Dust extraction
An adaptor is required to connect a vacuum cleaner or dust
extractor to the tool.
• Insert the dust extraction adaptor into the saw dust
outlet (9).
• Connect the vacuum cleaner hose to the adaptor.
Accessories
The performance of your tool depends on the accessory
used. Stanley and Piranha accessories are engineered to
high quality standards and designed to enhance the
performance of your tool. By using these accessories you
will get the very best from your tool.
Warning!
The use of any accessory not
recommended for use with this tool could be
hazardous. Use only 185mm blades with 19mm
or 20mm diameter arbor.
Maintenance
Your tool has been designed to operate over a long period
of time with a minimum of maintenance. Continuous
satisfactory operation depends upon proper tool care and
regular cleaning.
Warning!
Before performing any maintenance,
switch off and unplug the tool.
• Regularly clean the ventilation slots in your tool using a
soft brush or dry cloth.
• Regularly clean the motor housing using a damp cloth.
Do not use any abrasive or solvent-based cleaner.
Important! To assure product SAFETY and
RELIABILITY, repairs, maintenance and adjustment
(other than those listed in this manual) should be
performed by authorized service centers or other
qualified service personnel, always using identical
replacement parts.
Lubrication
Stanley tools are properly lubricated at the factory and are
ready for use.
Service Information
STANELY offers a full network of company-owned and
authorized service locations. All STANLEY Service Centers
are staffed with trained personnel to provide customers with
efficient and reliable power tool service. For more
information about our authorized service centers and if you
need technical advice, repair, or genuine factory
replacement parts, contact the STANLEY location nearest
you.
Specifications
STSC1518
Voltage
220-240V
Frequency
50/60Hz
Power
1510W
No-Load Speed
5500/min (rpm)
Maximum cutting depth
62mm AT 90°
46mm AT 45°
Technical Data
The vibration emission level given in this information sheet
has been measured in accordance with a standardised test
given in EN 60745 and may be used to compare one tool
with another. It may be used for a preliminary assessment of
exposure.
Warning:
The declared vibration emission level
represents the main applications of the tool.
However if the tool is used for different
applications, with different accessories or poorly maintained,
the vibration emission may differ. This may significantly
increase the 1.5exposure level over the total working period.
An estimation of the level of exposure to vibration should
also take into account the times when the tool is switched
off or when it is running but not actually doing the job. This
may significantly reduce the exposure level over the total
working period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and
the accessories, keep the hands warm, organisation of work
patterns.
L
pA
(sound pressure)
dB(A)
92.5
K
pA
(sound pressure uncertainty)
dB(A)
3
L
WA
(sound power)
dB(A)
103.5
K
WA
(sound power uncertainty)
dB(A)
3
Vibration total values (triax vector sum) according to
EN 60745:
Cutting wood (a
h, W
) = 3.3 m/s
2
,
uncertainty (K) = 1.5 m/s²
