manualshive.com logo in svg

Stanley PG6133, Инструкция по эксплуатации, Страница: 3 / 28

Поделиться
Скачать
Stanley PG6133 Скачать руководство пользователя страница 3

2

3

INTRODUCTION

Dear Customer,
Thank you for purchasing this chainsaw which has passed 
through our extensive quality assurance processes. Every 
care has been taken to ensure that it reaches you in perfect 
condition. However, in the unlikely event that you should 
experience a problem, or if you require any assistance please 
do not hesitate to contact us;

If you have a problem, call customer service do not 
return this chainsaw to the place of purchase.

CUSTOMER SERVICE

Australia: 1300 660 457
New Zealand: 0800 474 876
Operating times: Monday – Friday
8.30am - 5.30 pm

Australian Eastern Standard Time (AEST)

EXPRESS WARRANTY STATEMENT CHAINSAW 

GROUP

You are not required to do anything to register your chainsaw 
purchase.  Please attach the purchase receipt to this manual 
and ensure both are kept safe.  We hope you enjoy your 
new chainsaw, and if you have any problems call customer 
service on the above phone numbers.  Do not return to place of 
purchase.
Smart Marketing Group Pty Ltd (SMG) warrants that this 
chainsaw will be free from manufacturing faults or defects 
for 12 months from the date of purchase, providing original 
purchase receipt is kept and shown when needed and is subject 
to the terms and conditions below.
If a warranty fault appears within the warranty period, SMG 
reserves the right to replace or repair the product.  In the event 
that SMG chooses to replace the product, this original warranty 
will expire at the original date.  If the product includes various 
accessories or components, only the defective accessory or 
component will be replaced or repaired.
SMG reserves the right to replace defective parts of the 
product with parts and components of similar quality, grade and 
composition where an identical part or component is not available.
Products presented for repair may be replaced by refurbished 
products of the same type rather than being repaired.  
Refurbished parts may be used to repair the products.

What is covered.

• Manufacturing fault or defect.

How to claim under this warranty.

•   Call customer service, phone number at the top.
•   Ensure you have the following: Original purchase receipt, 

Model of chainsaw, Serial number of chainsaw.

•   Discuss the issue.
•   Customer service will advise which authorised service agent 

to take the chainsaw to provided the issue is a warranty one.

•   Take chainsaw to authorised service agent  for repair.

What is not covered.

•   Commercial use of chainsaw.
•   Use of chainsaw in a commercial premises.
•   Damage caused by incorrect fuel or incorrectly mixed 2 

stroke fuel.

•   Damage or deterioration due to transport.
•   Damage caused by negligence, misuse, abuse or accident 

or incorrect voltage and wattage.

•   Any corrosion or rusting.
•   Damage caused by incorrect set up and start up.
•   Replacement parts due to general wear and tear.
•   Chainsaws with serial number defacement, modification or 

removal.

•   Chainsaws which have been serviced by other than an 

authorised SMG service agent.

•   Chainsaws with no original purchase receipt.
•   Chainsaws which have been on sold, not original purchaser.
•   Damage due non-servicing of chainsaw as is required by 

this manual.

•   Blockages / damage caused by dust, dirt, spiders webs  

or insects.

•   Damage caused by the incorrect fitting of accessories.
•   Damage caused by overloading, overworking  

the chainsaw.

•   Damage to attached equipment or third party accessories.
•   Damage caused by attached equipment or  

third party accessories.

CONTACT DETAILS

Smart Marketing Group Pty Ltd
33-35 Lionel Road, Mt. Waverley
Victoria 3149, Australia.
Tel (+613) 9543 7266
Fax (+613) 9543 9839
[email protected]

Содержание PG6133





























Отзывы:

Нет отзывов