Stanley Mourne, Инструкция по установке и эксплуатации

Страница: 19 / 24

Remove all loose fitting parts, hotplate, bonnet door
from the top of the cooker. Open the direct damper.
Where a flue chamber is fitted in conjunction with a
vertical flue pipe remove the cleaning door from the
front of this fitting in order to obtain access. See
Fig.18.
To remove all the accumulated deposits take off the
cleaning plate situated immediately under the oven
on the front of the cooker and thoroughly clean out
the residue from the side flue, back flue and base
plate. This operation is essential otherwise the flow
of combustion gases will be obstructed or even
stopped, and satisfactory oven temperature will not
be maintained, apart from which such deposits will
cause smoking. See Fig.22.
Replace all loose parts which have been removed
making sure that all cooking surfaces have been
thoroughly cleaned on the underside. See Fig.23.
18
CLEANING INSTRUCTIONS
Fig.18
Fig.19
Fig.20
Fig.21
Fig.22
Fig.23
All deposits from the flue pipe and the top of the
oven may be brushed both into the firebox and
down the back flue passage way. See Fig. 19 & 20.
Deposits which have accumulated on the side of
the oven must also be brushed downward and
particular attention must be paid to the back
flueway which runs from the bonnet down to the
bottom left corner immediately underneath the
oven. See Fig.21.
Flue Way Cleaning Brush
Flue Way Cleaning
Brush
Flue Way Cleaning
Brush