Stanley Hugs CGS-HGS-1000, Руководство пользователя

Страница: 17 / 24

Maintenance
13
Hugs® Wi-Fi Tag Charger User Guide
Maintenance
Operational Checks
It is recommended to verify all LEDs are working by placing a Hugs Tag in
each of the impressions, at least once a week. If, at any time, an LED fails
to light up (even when you switch the Charger Off then On again), contact
Support.
Cleaning Instructions
The Hugs Tag Charger can be cleaned using a soft bristle brush. Follow these
guidelines for cleaning the Charger:
• First, consult with your Infection Control representative for cleaners
available to your hospital that have been approved for use on plastics.
• Use a disinfectant with no more than 20% alcohol or enzymatic cleaners
with a mild pH such as Enzol or Maxizyme.
• Do not use pathogenic cleaners specified for TB.
• Do not soak the Charger.
• Do not use an autoclave to clean the Charger or serious damage may
result.
Please refer to the table on the following page as a guideline for suggested
cleaning materials and their preparation amounts.
NOTE: Cleaning products are currently being tested on the Charger. This
document will be updated once the results are tabulated.