Stanley Hugs CGS-HGS-1000, Руководство пользователя

Страница: 15 / 24

Hugs Tags States
11
Hugs® Wi-Fi Tag Charger User Guide
Hugs Tags States
State Description
Dormant • Initial state after manufacturing
• When the tag is not in use
In-Charger When the Hugs Tag is placed in the charger:
• The Kisses bond information is automatically cleared.
• A Hugs Tag In-charger mode does not sense bands. Note: The
tag must be removed from the charger to allow insertion of a
band.
• Three Wi-Fi messages (assuming the tag has enough battery
to transmit these messages) are transmitted indicating that the:
- Hugs Tag is in the charger
-
Bonding status is erased
-
Hugs Tag is asleep
The Hugs Tags exit charging mode and enters into normal sleep mode when
they are removed from the Charger (even if they are not fully recharged).
Normal
Sleep • When the tag is not in use
• Kisses ignored
• When it is ready to be activated
• When it can be connected to a Charger
Active
- Band
Connected • The Hugs Tag is on a baby
• Able to bond in accordance to the bonding status:
-
Able to bond
- Bonded
- Not bonded (unable to bond)
• Kisses accepted
Active
Alarm -
Band Cut During a alarm from the band being cut, the following is true for the
Hugs Tag:
• The tag is NOT on a baby
• The tag is able to bond in accordance to the bonding status:
- Able to bond
-
Bonded
-
Not bonded (unable to bond)
• Kisses accepted. Band can be reconnected
• Can be connected to Charger
Sleep Alarm
- Band Cut When the Hugs Tag alarms during sleep mode, the following is true:
• The tag is NOT on baby
• Unable to bond
• Kisses ignored
• Band can be reconnected
• Can be connected to Charger