D A N G E R
I M P O R T A N T
READ OPERATION MANUAL AND
SAFETY INSTRUCTIONS FOR THIS
TOOL BEFORE USING IT.
USE ONLY PARTS AND REPAIR
PROCEDURES APPROVED BY
STANLEY AND DESCRIBED IN THE
OPERATION MANUAL.
TAG TO BE REMOVED ONLY BY
TOOL OPERATOR.
SEE OTHER SIDE
1. FAILURE TO USE HYDRAULIC HOSE
LABELED AND CERTI-
FIED AS NON-CONDUCTIVE
WHEN USING HYDRAULIC TOOLS
ON OR NEAR ELECTRICAL LINES MAY RESULT IN DEATH OR
SERIOUS INJURY.
BEFORE USING HOSE
LABELED AND CERTIFIED AS NON-
CONDUCTIVE
ON OR NEAR ELECTRIC LINES BE SURE THE
HOSE IS
MAINTAINED AS NON-CONDUCTIVE
. THE HOSE
SHOULD BE REGULARLY TESTED FOR ELECTRIC CURRENT
LEAKAGE IN ACCORDANCE WITH YOUR SAFETY DEPARTMENT
INSTRUCTIONS.
2. A HYDRAULIC LEAK OR BURST MAY CAUSE OIL INJECTION
INTO THE BODY OR CAUSE OTHER SEVERE PERSONAL IN-
JURY.
A
DO NOT
EXCEED SPECIFIED FLOW AND PRESSURE FOR
THIS TOOL. EXCESS FLOW OR PRESSURE MAY CAUSE A
LEAK OR BURST.
B
DO
NOT
EXCEED RATED WORKING PRESSURE OF HYDRAU
LIC HOSE USED WITH THIS TOOL. EXCESS PRESSURE MAY
CAUSE A LEAK OR BURST.
C CHECK TOOL HOSE COUPLERS AND CONNECTORS DAILY
FOR LEAKS.
DO NOT
FEEL FOR LEAKS WITH YOUR HANDS.
CONTACT WITH A LEAK MAY RESULT IN SEVERE PERSONAL
INJURY.
15875
I M P O R T A N T
READ OPERATION MANUAL AND
SAFETY INSTRUCTIONS FOR THIS
TOOL BEFORE USING IT.
USE ONLY PARTS AND REPAIR
PROCEDURES APPROVED BY
STANLEY AND DESCRIBED IN THE
OPERATION MANUAL.
TAG TO BE REMOVED ONLY BY
TOOL OPERATOR.
SEE OTHER SIDE
15875
D A N G E R
D DO NOT LIFT OR CARRY TOOL BY THE HOSES. DO NOT
ABUSE HOSE. DO NOT USE KINKED, TORN OR DAMAGED
HOSE.
3. MAKE SURE HYDRAULIC HOSES ARE PROPERLY CONNECTED
TO THE TOOL BEFORE PRESSURING SYSTEM. SYSTEM PRES-
SURE HOSE MUST ALWAYS BE CONNECTED TO TOOL "IN"
PORT. SYSTEM RETURN HOSE MUST ALWAYS BE CON-
NECTED TO TOOL "OUT" PORT. REVERSING CONNECTIONS
MAY CAUSE REVERSE TOOL OPERATION WHICH CAN RESULT
IN SEVERE PERSONAL INJURY.
4. DO NOT CONNECT OPEN-CENTER TOOLS TO CLOSED-CEN-
TER HYDRAULIC SYSTEMS. THIS MAY RESULT IN LOSS OF
OTHER HYDRAULIC FUNCTIONS POWERED BY THE SAME
SYSTEM AND/OR SEVERE PERSONAL INJURY.
5. BYSTANDERS MAY BE INJURED IN YOUR WORK AREA. KEEP
BYSTANDERS CLEAR OF YOUR WORK AREA.
6. WEAR HEARING, EYE, FOOT, HAND AND HEAD PROTECTION.
7. TO AVOID PERSONAL INJURY OR EQUIPMENT DAMAGE, ALL
TOOL REPAIR MAINTENANCE AND SERVICE MUST ONLY BE
PERFORMED BY AUTHORIZED AND PROPERLY TRAINED PER-
SONNEL.
SAFETY TAG
5
The safety tag at right is
attached to the power unit
when shipped from the
factory. Read and
understand the safety
instructions listed on this
tag before removal. We
suggest you retain this tag
and attach it to the tool
when not in use.
SAFETY STICKERS & TAGS
CHOKE PULL DECAL
HYDRAULIC OIL
STICKER
SAFETY TAG
Do not remove until read)
SERIAL NO. LOCATION
(At top of dash panel)
BATTERY CHARGE TAG
(Do not remove until read)
(shown smaller then actual size)
EXHAUST STICKER
EXHAUST FUMES STICKER
FUEL STICKER
COUPLER STICKER
WEIGHT STICKER
SOUND POWER LEVER STICKER
MANUAL STICKER
110
110
L
WA
L
WA
BR87, BR37, CH18
L
WA
L
WA
BR87, BR37, CH18
101
DO NOT OPERATE THE PUMP WITH-
OUT WATER. OPERATING THE PUMP
WITHOUT WATER WILL SEVERLY DAM-
AGE THE PUMP.
CAUTION STICKER
(If Equipped with Water Pump Kit)
