Tool operators and maintenance personnel must always comply with the safety precautions given in this
manual and on the stickers and tags attached to the equipment.
These safety precautions are given for your safety. Review them carefully before operating the tool and
before performing general maintenance or repairs.
Supervising personnel should develop additional precautions relating to the specific work area and local
safety regulations. If so, place the added precautions in the space provided on page 5.
In addition to this manual, read and understand safety and operating instructions in the Engine
Operation Manual furnished with the power unit.
GENERAL SAFETY PRECAUTIONS
The HP1 Compact Hydraulic Power Unit will provide safe and dependable service if operated in accor-
dance with the instructions given in this manual. Read and understand this manual and any stickers and
tags attached to the Power Unit. Failure to do so could result in personal injury or equipment damage.
• Operators must start in a work area without bystanders. The operator must be familiar with all prohib-
ited work areas such as excessive slopes and dangerous terrain conditions.
• Establish a training program for all operators to ensure safe operation.
• Do not operate the power unit unless thoroughly trained or under the supervision of an instructor.
• Always wear safety equipment such as goggles, ear and head protection, and safety shoes at all times
when operating the power unit and a hydraulic tool.
• Do not inspect or clean the power unit while the unit is running.
• Always use hoses and fittings rated at 2500 psi/172 bar with a 4 to 1 safety factor. Be sure all hose
connections are tight.
• Make sure all hoses are connected for correct flow direction to and from the tool being used.
• Do not inspect hoses and fittings for leaks by using bare hands. "Pin-hole" leaks can penetrate the
skin.
•
Never operate the power unit in a closed space.
Inhalation of engine exhaust can be fatal.
• Do not operate a damaged or improperly adjusted power unit.
• Never wear loose clothing that can get entangled in the working parts of the power unit.
• Keep all parts of your body away from the working parts of the power unit.
SAFETY PRECAUTIONS
2
Do not operate this equipment or associated
equipment until the following safety instruc-
tions have been thoroughly read and under-
stood! Read this manual before installing,
operating or maintaining this equipment.
