8
ENGLISH
(Original instructions)
u
Line up the hose end (24) with the high-volume pump
deflate connection (11).
Then, firmly slide in the hose so it
is securly in place.
u
Insert the hose, or it’s tapered nozzle (8) into the object
being deflated.
u
Press the high-volume side of the mode power
switch (2), indicated by the air mattress symbol.
u
To turn off, push the power switch to the center position.
u
To remove the hose, twist the hose counterclockwise
and slide hose off.
Setting the automatic shut-off pressure
Note: The digital readout will only show inflation pressures
when the inflator is being used. In both inflation and pump
mode the unit will show battery status.
u
To switch between the different units (psi, bar or kPa),
press the pressure mode/reset button (5) until the required
units are displayed.
u
Press the - or + pressure setting buttons (4) until the
required pressure is displayed.
u
After 3 seconds the display will flash and return to a
reading of “0.0”. This is normal.
u
Connect the universal valve adapter (9) and accessories,
if required, to the item to be inflated, making sure that
the lever of the universal valve adapter is in the down
position to lock it in place.
u
To start the inflator press the mode power switch (2),
towards the side of the tire symbol.
u
When the item to be inflated has reached the preset
value the unit will automatically turn off.
NOTE: You may notice the actual pressure reading may
drop after a couple of seconds. This is normal.
7. To stop the inflator at any time, press the main power
button back to the center position.
Note: If the AC/DC power switch is turned off, all settings
will be lost and will need to be reentered. This is a safety
feature to prevent the risk of items OVER INFLATING.
Using the inflator as a pressure gauge
u
Connect the universal valve adapter (9) to the item to
be checked.
u
Press the mode power switch (2), on the side of the tire
symbol.
u
The digital readout will display the item’s pressure.
u
After checking, press the mode power switch (2) back
to the center position and return the air hose to the
storage location.
Maintenance
Your STANLEY FATMAX corded and cordless appliance has
been designed to operate over a long period of time with a
minimum of maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning.
Warning! Before performing any maintenance on cordless
appliances:
u
Run the battery down completely if it is integral and then
switch off.
u
Unplug the charger before cleaning it. Your charger does
not require any maintenance apart from regular cleaning.
u
Regularly clean the ventilation slots in your appliance/
charger using a soft brush or dry cloth.
u
Regularly clean the motor housing using a damp cloth. Do
not use any abrasive or solvent-based cleaner.
u
If the supply cord is damaged, it must be replaced by
the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard .
Protecting the environment
Z
Separate collection. Products and batteries
marked with this symbol must not be disposed of
with normal household waste.
Products and batteries contain materials that can be recov-
ered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according to
local provisions. Further information is available at
www.2helpU.com
Technical Data
SFMCE520
Voltage
18Vdc, 230Vac and 12V vehicle voltage
Weight
2.21Kg
Charger
SFMCB11
SFMCB12
SFMCB14
Input Voltage
V
AC
230
230
230
Output Voltage
V
DC
18
18
18
Current
A
1.25
2
4
Battery
SFMCB201 SFMCB202
SFMCB204 SFMCB206
Voltage
V
DC
18
18
18
18
Capacity
Ah
1.5
2.0
4.0
6.0
Type
Li-Ion
Li-Ion
Li-Ion
Li-Ion
N717290 REV01
08/2020
Australia & New Zealand
Stanley Black & Decker
www.stanleytools.com.au
Tel.1800 338 002 (Aust) or Tel. 0800 339 258 (NZ)
810 Whitehorse Road Box Hill VIC 3128, Australia
