User Manual
GB
6
Remote Display Plumb LEDs-
Press the power button momentarily to select remote display Plumb LEDs ON or OFF.
On is solid, Off is flashing. After 5 seconds of inactivity, the remote display will exit menu mode and the setting will be
saved until unit is turned off.
Plumb
LEDs
LEDs ON
LEDs OFF
Operation
Sets of LEDs will flash quickly as shown below when in the modes shown.
If the laser goes above or below the receiver, the last set of LEDs to detect the laser will flash slowly.
Grade Detection
Same for receiver and remote display
Receiver
too high
or lost
beam
Receiver
on grade
Receiver
too low
or lost
beam
9 Channels
(see dots)
7 Channels
(see dots)
Yellow
Yellow
Green
Red
Red
Plumb Detection
Excavator bucket position as shown.
Receiver
Remote Display
LED
Flashing
Green
LED
Solid
Green
LED
Flashing
Red
Out
Out
Plumb
Plumb
In
In
Red
Green
Red
Troubleshooting
No Signal to Remote-
• Receiver out of range
• Receiver turned off
• Receiver on a different communication channel
Note:
The remote and receiver must be in communication for the menu to be accessed on the remote.
L
L
Содержание FatMax FMHT1-77360
Страница 152: ...NOTES ...
Страница 153: ...NOTES ...