Stanley FATMAX FMEG725, Руководство пользователя

Страница: 7 / 24

ENGLISH (Original instructions)
7
Environmental safety
• Paint should be removed in such a manner as to minimize
the amount of dust generated.
• Areas where paint removal is occurring should be sealed
with plastic sheeting of 4 mils thickness.
• Sanding should be done in a manner to reduce tracking of
paint dust outside the work area.
Residual risks
In spite of the application of the relevant safety regulations
and the implementation of safety devices, certain residual
risks cannot be avoided. These are:
– Impairment of hearing
– Risk of personal injury due flying particles.
– Risk of burns due to accessories becoming hot during
operation.
– Risk of personal injury due to prolonged use.
– Risk of dust from hazardous substances.
Labels on tool
The label on your tool may include the following symbols:
Position of date code
The Date Code, which also includes the year of manufacture,
is printed into the housing.
Example:
2017 XX JN
Year of manufacturing
Electrical safety
This tool is double insulated; therefore no earth wire
is required. Always check that the power supply
corresponds to the voltage on the rating plate.
• If the supply cord is damaged, it must be replaced by the
manufacturer or an authorised Stanley Fat Max Service Centre
in order to avoid a hazard.
Additional safety information
Warning: We recommend the use of a residual
current device with a residual current rating of 30mA
or less.
Package contents
This product package includes:
1 Angle grinder
1 Guard
1 Flange set
1 Spanner
1 Handle
1 Instruction manual
• Check the tool, parts, and accessories to see if they are
damaged during transportation.
• Take a few moments to read and understand this manual
before using the tool.
Features
Warning: Never modify the power tool or any part of
the tool, otherwise it may cause damage to the tool
or result in personal injury.
a. ON/OFF switch
b. Spindle lock
c. Guard
Do not use sandpaper discs and grinding wheels other than
those with depressed center.
Do not use the tool in wet conditions or environments in the
presence of flammable liquids or gases.
This heavy-duty angle grinder is a professional power tool.
Do not allow children to come in contact with this tool.
Inexperienced operators are required to use this tool under
supervision.
Assembly
Warning: To minimize the danger of serious personal
injury, please switch off the tool power and disconnect all
plugs before adjusting or removing/installing any
accessory. Before reassembling the tool, press and release
the trigger switch to make sure the tool is already switched off.
Attaching and Removing the Wheel Guard (Fig. 2)
Warning: To minimize the danger of serious personal
injury, please switch off the tool power and disconnect all
plugs before adjusting or removing/installing any
accessory. Before reassembling the tool, press and release
the trigger switch to make sure the tool is already switched off.
W ARNING! To reduce the risk of injury, the user
must read the instruction manual before use.
Wear ear protection.
Wear safety glasses or goggles.
V Volts Direct Current
A Amperes n
0
No-Load Speed
Hz Hertz Class II Construction
W Watts Earthing Terminal
min minutes Safety Alert Symbol
Alternating
Current
/min.
Revolutions or
Reciprocation per
minute