Stanley FATMAX FMEG222, Оригинальное руководство пользователя

Страница: 8 / 84

8
ENGLISH (Original instructions)
Switching on and off
u
To switch the tool on, press the lock-off button (2) and
subsequently press the on/off switch (1).
u
For continuous operation, press the lock-on button (3) and
release the on/off switch.
u
To switch the tool off, release the on/off switch. To switch
the tool off in continuous operation, press the on/off switch
once more and release it.
Warning! Do not switch the tool off while under load.
Soft Start Feature
The soft start feature allows a slow speed build-up to avoid an
initial jerk when starting. This feature is particularly useful
when working in confined spaces.
No-Volt
The No-volt function stops the grinder restarting without the
switch being cycled if there is a break in the power supply.
Hints for optimum use
u
Firmly hold the tool with one hand around the side handle
and the other hand around the main handle (fig. F).
u
When grinding, always maintain an angle of approx. 15°
between the disc and the workpiece surface.
Maintenance
Your Stanley Fat Max corded/cordless appliance/tool has
been designed to operate over a long period of time with a
minimum of maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning.
Warning! Before performing any maintenance on corded/
cordless power tools:
u
Switch off and unplug the appliance/tool.
u
Or switch off and remove the battery from the appliance/
tool if the appliance/tool has a separate battery pack,
u
Or run the battery down completely if it is integral and then
switch off.
u
Unplug the charger before cleaning it. Your charger does
not require any maintenance apart from regular cleaning.
u
Regularly clean the ventilation slots in you appliance/tool/
charger using a soft brush or dry cloth.
u
Regularly clean the motor housing using a damp cloth.
Do not use any abrasive or solvent-based cleaner.
u
Regularly open the chuck and tap it to remove any dust
from the interior (when fitted).
Mains plug replacement (U.K. & Ireland only)
If a new mains plug needs to be fitted:
u
Safely dispose of the old plug.
u
Connect the brown lead to the live terminal in the new plug.
u
Connect the blue lead to the neutral terminal.
Warning! No connection is to be made to the earth terminal.
Follow the fitting instructions supplied with good quality plugs.
Recommended fuse: 13 A.
Protecting the environment
Z
Separate collection. Products and batteries marked
with this symbol must not be disposed of with normal
household waste.
Products and batteries contain materials that can be
recovered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according to
local provisions.
Technical data
FMEG222 Type 1
Input voltage V
AC
230
Power input W 1,200
Rated speed min-1 11,000
Disc diameter mm 125
Disc bore mm 22
Max disc thickness
grinding discs mm 6
cutting discs mm 3.5
Spindle size M14
Weight kg 2.7
Level of sound pressure according to EN 60745:
L
pA
(sound pressure) 91.0 dB(A), Uncertainty (K) 3 dB(A)
L
WA
(sound power) 102.0 dB(A), Uncertainty (K) 3 dB(A)
Vibration total values (triax vector sum) according to EN60745:
Surface grinding (a
h,SG
) 8.2 m/s
2
, uncertainty (K) 1.5 m/s
2
EC declaration of conformity
MACHINERY DIRECTIVE
%
FMEG222 Angle Grinder
Stanley Fat Max declares that these products described under
"technical data" are in compliance with:
EN60745-1:2009 +A11:2010; EN60745-2-3:2011+A2:2012
+A11:2014+A12:2014+A13:2015
These products also comply with Directive
2006/42/EC, 2014/30/EU 2011/65/EU.
For more information, please contact Stanley Fat Max at the
following address or refer to the back of the manual.