Stanley FATMAX FMC675, Оригинальное руководство пользователя

Страница: 8 / 12

8
ENGLISH (Original instructions)
9
ENGLISH (Original instructions)
standards and designed to enhance the performance of your
tool. By using these accessories you will get the very best
from your tool.
Blades
The saw will accept a blade up to 30 cm long. Always use the
shortest blade suitable for your project but long enough to
keep the blade cutting through the material. Longer blades are
more likely to be bent or damaged during use. During
operation some longer blades may vibrate or shake if the saw
is not kept in contact with the workpiece.
Maintenance
Your Stanley FatMax tool has been designed to operate over
a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper tool
care and regular cleaning.
Your charger does not require any maintenance apart from
regular cleaning.
Warning! Before performing any maintenance on the tool,
remove the battery from the tool. Unplug the charger before
cleaning it.
u
Regularly clean the ventilation slots in your tool and
charger using a soft brush or dry cloth.
u
Regularly clean the motor housing using a damp cloth.
u
Do not use any abrasive or solvent-based cleaner.
u
Regularly open the chuck and tap it to remove any dust
from the interior.
Protecting the environment
Z
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your Stanley FatMax product
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product
available for separate collection.
z
Separate collection of used products and
packaging allows materials to be recycled and
used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand
for raw materials.
Local regulations may provide for separate collection of
electrical products from the household, at municipal waste
sites or by the retailer when you purchase a new product.
Batteries
Z
Stanley FatMax batteries can be recharged many
times. At the end of their useful life, discard batteries
with due care for our environment:
u
Run the battery down completely, then remove it from the
tool.
u
NiCd, NiMH and Li-Ion batteries are recyclable. Take them
to any authorised repair agent or a local recycling station.
Technical data
FMC675 (H1)
Input voltage V
dc
18
No-load speed min
-1
0-3000
Stroke length
mm 25.4
Weight kg 2.054
Charger
905998**
typ. 1 906086**
typ. 1
Input Voltage V
AC
230 230
Output Voltage
V
DC
18 18
Current A 1 2
Approx. charge time min
90 - 240 45 - 120
Battery
FMC685L FMC687L FMC688L
Voltage V
DC
18 18 18
Capacity Ah 1.5 2.0 4.0
Type Li-Ion Li-Ion Li-Ion
Level of sound pressure according to EN 60745:
Sound pressure (L
pA
) 84.5 dB(A), uncertainty (K) 5 dB(A)
Sound power (L
WA
) 95.5 dB(A), uncertainty (K) 5 dB(A)
Vibration total values (triax vector sum) according to EN 60745:
Cutting chipboard (a
h, B
) 18.0 m/s
2
, uncertainty (K) 1.5 m/s
2
Cutting wooden beams (a
h, WB
) 13.3 m/s
2
, uncertainty (K) 1.5 m/s
2