Stanley ECO Pro Скачать руководство пользователя страница 10

Страница: 10 / 12

Attachment 5. Applications

Access Control – Full Control by ECO Pro

The ECO Pro / MC521 Pro system can be used with access control systems by connecting

the activation output of the access control system to the push plate input of the MC521

Pro (TB4-9 to TB4-10).

In this way the ECO Pro can automatically schedule the correct operating mode of the door

with full control.

Access Control – Access Control Override of ECO Pro

The ECO Pro / MC521 Pro system can be used with access control systems by connecting

the activation output of the access control system to the hold open input of the MC521

Pro (TB2-1 to TB2-2).

In this way the ECO Pro can automatically schedule the correct operating mode of the door

with full control.

“Morning Entry Switch”

The ECO Pro / MC521 Pro system can be used with a morning entry switch that permits

users to open the door even though the ECO Pro is set to keep the door in Closed mode.

This is accomplished by connecting a switch / key-switch to the hold open input of the

MC521 Pro (TB2-1 to TB2-2).

204082

Rev. B 10/11/2012

Page 10 of 12

Содержание ECO Pro











