BPP060F
User Manual ◄ 17
TROUBLESHOOTING
Problem
Solution
The tool won’t crimp when I press the trigger.
Ensure the battery is charged.
Disengage the trigger lock.
The InteLED flashes red when I activate the tool.
At the end of the crimp cycle, Inteled flashes red and then
flashes green for good crimp and then InteLED lights up
white.
The maintenance interval is about to elapse.
Have the tool serviced as soon as possible.
Before the automatic switch off of the tool, InteLED flashes
white during 10 seconds, red during 1 second and the
tool switches off.
The maintenance is achieved.
Have the tool serviced
immediately.
The tool repeatedly give me bad crimps / The InteLED
flashes red after every crimp.
Ensure the battery is fully charged.
Ensure the dies are inserted properly into the crimping
head.
If problem persists, have the tool serviced as soon as
possible.
The tool is leaking hydraulic oil.
Have the tool serviced immediately.
The tool is not saving data or will not connect to DUBUIS
Crimp software.
Have the tool serviced as soon as possible.
