16
Model
Energy
Efficiency
Class
Heat Output
to Room
Heat Output
to Water
Energy
Efficiency
Index
Preferred
Fuel
Nominal
Heat
Output
Net Efficiency
Cara Glass
NB SF
Stove
A
5
N/A
104.25
Wood
5
78.1
LIGHTING
Before lighting the stove check with the installer that
the installation work and commissioning checks
described previously have been carried out correct-
ly and that the chimney has been swept clean, is
sound and free from any obstructions. As part of the
stoves commissioning and handover the installer
should demonstrate how to operate the stove cor-
rectly.
LIGHTING THE STOVE
1.
Open the firebox door and remove all debris
from the grate and ashpan.
2.
Open the primary air control fully.
3.
Set the secondary air controls to the required
position depending on the fuel being burned i.e.
open when burning wood and closed when
burning coal/ anthracite.
4.
Place pieces of paper and kindling on top of the
grate and add a small quantity of fuel. Light the
fire and close the firebox door.
5.
When a good fire is established, open the fire
door and load the fuel as required.
6.
Adjust the primary and secondary air controls as
required depending on the fuel type being used
and the heat output required (see table below).
Both controls should be adjusted in conjunction
with each other to get the appropriate burn rate
with exact settings on each control depending
on the draught conditions of the chimney to
which the unit is connected.
TECHNICAL DATA
MANUFACTURED SMOKELESS FUEL
WOOD
Max Output: (kW)
Nominal Output: (kW)
Room
6.5 kW
5.0 kW
Room
5.0 kW
5.0 kW
Typical refuelling intervals to obtain nom-
inal outputs:
MSF 1
hour
WOOD 0.8 hour
Mean Flue Gas Temperature
o
C
288
316
Flue Gas Mass Flue
3.6
4.0
Gross Weight:
100 kgs
Flue Outlet:
125 mm
Efficiency
80.0%
78.1%
Flue Draught:
12 Pa
12 Pa
Log Size:
-
310
