1.2 Front-Panel Operation
1 – 17
to
,
and then press the [Enter] key. The message “
”
will briefly display on the screen as confirmation that the inter-
face has been reset.
•
Interface speed. The SR470 link speed may be selected to 10
Base-T, 100 Base-T, or to auto-negotiate between these speeds.
Use the [
←
] and [
→
] keys to choose between
,
for speed 10 Base-T,
,
for speed 100 Base-T, and
for auto-negotiation.
Under certain circumstances Auto-negotiation of link speed
may fail. To avoid this, the SR470 defaults to manually config-
ured 100 Base-T link speed.
•
Default router configuration. When this menu item is selected,
the numeric display of the SR470 will show
,
indicating that the router address is displayed on that line. (The
IPAddr
enunciator to the left of the numeric display is also lit
while displaying IP addresses.)
Use the [
←
] key to scroll over and display the full router ad-
dress, which might be (for example) 127.0.0.1. A valid router
address consists of four sets of numbers in the range 0 to 255,
separated by dots (decimal points). To enter a new router, type
the new value with the keypad, including the dots, and press
the [Enter] key. If the entry is invalid, the instrument will beep
and the error message
will appear briefly on the numeric display.
•
Subnet address
/
network mask. When this menu item is se-
lected, the numeric display of the SR470 will show
SR470 Shutter Controller
