Standen TSP 1900, Руководство оператора

Страница: 19 / 61

Digger Assembly
The digger assembly, which includes the depth wheels, disc coulters, shares, primary
web, secondary web and agitators, is controlled by two hydraulic rams which raise and
lower the digger assembly in and out of work. Before attempting to operate the digger
assembly, the transport chains (item 1, fig 6) need to be unhooked from the chassis and
hung on the stowage hook (item 2, fig 6).
Always support the digger assembly on the chains (item 1, fig 6) before
transporting the harvester or when working under the machine.
The digger assembly is controlled electronically from the in-cab console. The 'DIGGER
SHARE' switch manually raises and lowers the digger assembly. When the switch is set
to ‘lower’ the digger assembly is in the ‘float’ position, and it will continue to lower until
the manual depth/suspension setting is reached or the ‘AUTO DEPTH’ takes over.
Manual Depth Control
The manual depth control sets the depth at which the digger shares will dig. Set the
depth control as follows:
1.
Operate the ‘DIGGER SHARE’ switch to lower the digger assembly. The digger
will lower until the suspension depth arm (item 1, fig 7) touches the stop block
(item 2, fig 7). The digger will continue to lower until the weight of the digger
assembly is taken up by the torsion bush (item 3, fig 7).
2. Note the depth at which the machine is digging.
3. Raise the digger assembly.
4. Loosen the stop block retaining bolts x2 (item 4, fig 7).
5. Adjust the stop block using the stop block adjuster (item 5, fig 7). Adjust both
sides evenly.
6. Lower the digger assembly and check the depth.
7. Readjust if necessary.
OPERATION 1.14
Fig 6 Fig 7