Standard PF-P330, Руководство оператора

Страница: 23 / 58

21
1.969 5.867 Memory 1
2.898 5.827 Memory 2
3.898 7.795 Memory 6
2 nd
Stopper
1 st
Stopper
Stopper
Position
Display
Storing the Present Job Setting to Memory
Press the memory button (Orange).
- To check the job setting in
the selected memory
number, press the stopper
position displaying button.
- If there is a job setting in the
selected memory number,
display shows the stopper
position and the memory
number, and memorized fold
pattern and the sheet size
lamp will illuminate. (The
sheet size lamp illuminates
only when the standard size
is memorized.)
- When the memorized job
setting is displayed, the other
memorized job settings can
be seen by pressing the 1st
stopper moving button.
- The display shows the memory
number to write and the
stopper position for about 2
sec., then shows the counter.
- The job setting is completed to
memorize.
Job setting will not be deleted
even if the power switch is
turned off.
- If there is already an another
memory, the memory will be
overwritten.
1 2 3 4 5
6 7
8 9 0
C
2 nd
Stopper
1 st
Stopper
Memory
Mode
Stopper
Position
Display
Stored To M1 Select No.
Press Memory To Store M7
1 2
3
4
5
6 7 8 9 0 C
2 nd
Stopper
1
st
Stopper
Memory
Mode
Stopper
Position
Display
2.921 5.846 Memory 7
0 / 0
Memory number goes up
Numeric Keypad
Stopper Position
Memory Number
Memory Number
Memory Button
Input the memory number to write the settings
using the numeric keypad (Gray).
Memory number goes down
Other Functions
S t o p p e r P o s i t i o n
Displaying Button
Stopper 1 Moving Button