Standard PF-P330, Руководство оператора

Страница: 22 / 58

20
Set the machine to the condition to write onto the
memory.
Storing the Present Job Setting to Memory
If the stopper positions are
fine-adjusted, adjusted
position will be memorized.
Although the blower setting
will not be memorized.
If the job setting is written to the memory, the machine can load the setting and set each part of the
machine to the setting easily. 10 job settings can be memorized at maximum.
1 2 3 4 5
6 7 8 9
0
C
2
nd
opper
1 st
Stopper
Memory
Mode
Stopper
Position
Display
Stored To M1 Select No.
Sheet Size, Fold Pattern
Mode Selecting Button
- When selecting single fold, press
the mode selecting button twice.
When selecting the fold pattern
except single fold, press the
mode selecting button three
times.
Open the extension panel and press the mode
selecting button (Yellow) to show the display below.
- Set the machine referring to
[Folding Standard Size Sheet.]
Refer to page 14