Standard Horizon PC-P430 Скачать руководство пользователя страница 6

Страница: 6 / 36

Machine Safety Features

This machine has been designed with safety in mind. Please understand
these features, and use them when operating the machine.

The machine is protected by

covers which prevent your

hands from reaching any dan-

gerous parts during operation.

The machine includes a key

switch. Only an authorized per-

son should have access to the

key.

When this door is open, the

machine will not run.

When the safety cover is open,

the knife is locked and the

machine will not run.

The machine will only start cut-

ting the sheets when both Cut-

ting buttons are pressed at the

same time.

If one of the Cutting buttons is

released while the machine is

cutting the sheets, the knife

automatically returns to the

starting position.

The machine is equipped with a

lever which moves the cut

sheets forward.

Cutting

Knife is

Locked

Cutting

Содержание Horizon PC-P430





































Результаты поиска

Содержание Horizon PC-P430

Отзывы:

Похожие инструкции для Horizon PC-P430

Бренды по названию

Популярные бренды

Standard Horizon PC-P430, Руководство пользователя

Результаты поиска

Содержание Horizon PC-P430

Отзывы:

Похожие инструкции для Horizon PC-P430

Бренды по названию

Популярные бренды