Standard 3360DNP Скачать руководство пользователя страница 5

Страница: 5 / 233

Safety Information

When using this machine, the following safety precautions should always be fol-
lowed.

Safety During Operation

In this manual, the following important symbols are used:

WARNING:

Indicates a potentially hazardous situation which, if instructions
are not followed, could result in death or serious injury.

CAUTION:

Indicates a potentially hazardous situation which, if instructions are not
followed, may result in minor or moderate injury or damage to property.

•

Connect the power cord directly into a wall outlet and never use an ex-
tension cord.

•

Disconnect the power plug (by pulling the plug, not the cable) if the
power cable or plug becomes frayed or otherwise damaged.

•

To avoid hazardous electric shock, do not remove any covers or
screws other than those specified in this manual.

•

Turn off the power and disconnect the power plug (by pulling the plug,
not the cable) if any of the following occurs:

•

You spill something into the machine.

•

You suspect that your machine needs service or repair.

•

The external housing of your machine has been damaged.

Содержание 3360DNP










































































































































































































































Результаты поиска

Содержание 3360DNP

Отзывы:

Бренды по названию

Популярные бренды

Standard 3360DNP, Руководство по эксплуатации

Результаты поиска

Содержание 3360DNP

Отзывы:

Бренды по названию

Популярные бренды