Standard 3360DNP Скачать руководство пользователя страница 202

Страница: 202 / 233

Troubleshooting

182

When the Add Ink Indicator (

) Lights

The

Add Ink

indicator (

) lights when it is time to supply ink.

CAUTION:

Note

❒

Be sure to supply ink of the same color as the current drum.

❒

Ink is easily removed from skin by waterless hand cleaners followed by wash-
ing with soap and water.

❒

Be careful not to get any ink on your clothing.

❒

Store ink under low temperature and humidity conditions.

❒

Do not store ink where it will be exposed to heat or direct sunlight.

❒

Store on a flat surface.

AAAA

Open the front door.

BBBB

Pull out the ink holder.

•

If ink comes into contact with your eyes, rinse immediately in running water.
For other symptoms, consult a doctor.

•

Keep the ink or ink container out of reach of children.

•

If ink is ingested, induce vomiting by drinking a strong saline solution. Con-
sult a doctor immediately.

•

Our products are engineered to meet high standards of quality and function-
ality, and we recommend that you use only the expendable supplies avail-
able at an authorized dealer.

Содержание 3360DNP










































































































































































































































Результаты поиска

Содержание 3360DNP

Отзывы:

Бренды по названию

Популярные бренды

Standard 3360DNP, Руководство по эксплуатации

Результаты поиска

Содержание 3360DNP

Отзывы:

Бренды по названию

Популярные бренды